Lvhuan Power 90kw Biomass Generator Gas Power Genset with Ce/ISO

• Customization: Available
• After-sales Service: One Year
• Warranty: 12 Months
• Model NO.: LHBG80
• Output Type: AC Three Phase
• Gas Source: Biomass
• Certification: CE, TLC, ISO, CCC
• Power: 50-200kW
• Standard: Standard
• Model Number (Engine Type): Lhbmg90
• Prime Power/Standby Power: Prime Power/Standby Power
• Rated Speed: 72/90rpm
• Rated Frequency: 50/60Hz
• Rated Voltage: 400V/230V
• Phase: AC 3-Phase, 4 Wire
• Voltage Stability: ≤±2%
• Engine Capacity: 12.9L
• Cylinder Number: 12
• Cylinder Bore: 135mm
• Transport Package: in Wooden Package
• Specification: CE ISO
• Trademark: Lvhuan
• Origin: Zhangqiu, Shandong
• HS Code: 85022000
• Production Capacity: 100pieces/Month

Product Description

 

Product Parameters

 

Model Number (Engine Type)	LHNG90
Brand Name	LVHUAN
Prime Power/Standby Power	72KW/90KW
Rated Speed	1500/1800RPM
Rated Frequency	50/60Hz
Rated Voltage	400V/230V
Phase	AC 3-Phase, 4 wire
Voltage Stability	≤±2%
Voltage transient	≤±10%
Voltage Stable time	≤1s
Heat consumption	≤11mj/kw.h
Lubricant consumption	≤1.0g/kw.h
Engine Capacity	12.90 L
Cylinder Number	6
Cylinder Bore	135mm
Stroke	150mm
Starting System	DC 24V electric motor
Cooling method	water cooler
Lubricant method	Passive and flying lubricant
Isolation class	H
Protection	IP23
Alternator	Chinese Siemens
Power Factor	0.8 lagging
Exciting method	brushless
Colour	your choice
Certificates	ISO 9001:2008, CE
Warranty	1 year or 1000 running hours which arrives first
Type	Open
Control system	Automatic alarm system
Size	2850X1100X1750mm
Weight	1900kg

Product Description

Biomass power generation is the use of biomass power generation of biomass energy, is one of the renewable energy generation, including direct combustion power generation, agriculture, forestry and agriculture and forestry waste waste gasification power generation, waste incineration power generation, landfill gas power generation, and biogas power generation.

Gas requirements for generator:
1m from genset's pressure regulating valve of inlet
1. Temperature of biomass≤ 40º C;
2. Pressure of biomass 5~20kPa, velocity of pressure≤ 1kPa/min;
3. H2S≤ 200mg/Nm3;
4. NH3≤ 20mg/Nm3;
5. Coke tar content≤ 20mg/Nm3;
6. Impurities particle size≤ 5μ M; Impurity content≤ 30mg/Nm3;
7. Moisture Content of biomass ≤ 40g/Nm3;
8. Biomass calorific value≥ 4.2MJ/Nm3.
Purification of biomass has a significant impact on machine life and continuous running time! 

 

Generator Set photos:

 

Generator Specification:

1. Power range: 10kw-1000kw, single or parallel running
2. Stable engine, famous alternator, PLC control panel
3. Multi-option of engine, alternator and control system and cooling system
4. Long continuous running hours, 8000 hours per year
5. With CE and ISO
6. Manufacturer, OEM provided 

Main spare parts:
1. Control system: America Woodward control system
2. Controller: ComAp, Deepsea, Woodward
3. Ignition system: American ALTRONIC, including:magneto, high-tension coil
4. Starting system: DC 24V electric motor. 
5. Mixer: IMPCO
6. Spark plug: STIT 

Worksite requirements for generator:
The worksite needs to meet following basic requirements:
 a)  Ambient temperature between -40ºC~40ºC;
 b)  Relative humidity less than 95%(35ºC);
 c)  Site elevation not higher than 2500m;
 d)  For outdoor installation, simple rain shelter is required 

Main composition of biomass gas
After being gasified, the basis of gas is CO(20%),      H2(9%),CH4(12%), CO2(12%), O2 (1%), N2(52%). The lower heating value is 5-6MJ/NM^3. Efficiency of gasification: 1kg dried material can generate 2Nm^3 GAS, conversation rate is more than 85%. 1kg dry material can generate 1kw.h power


 

Service committee:

a. Pre-sale service: 

We will send our engineer to prospect the site of power station free to charge. According to the situation of site we can supply you many drawings which can meet the requirement of design and construction, like power station floor plan, engineering flow sheet of circle cooling system, genset installation, genset foundation, electrical connection and some other techincal support etc. 

b. Sale service: 

We will send our engineer to the site to guide you the installation of generator set, subsystem and relative equipment. We will debug the generator set till it can generate power successfully. We will also supply a technical training to the operators. You also can send your staff to our company. We can train you till you can operate the generator set and during this time we can offer you board and lodging free of Charge. 

c. After-sale service: 

(1)in our company, different people is in charge of different area, we will response periodically and support you technical service free of charge, include equipment debugging, fault eliminating, technical advice, maintenance assistant, etc. 
(2)For the quality problem, we will service for you free of charge during the guarantee period. 
(3)One year guarantee period and lifetime service. 
(4)Insisting on principle of "solving problems first, trying to recover the generator set as soon as possible and then analysis the reason", we solve quality problem in time when genset doesn't work, We insure to help our clients to gain the biggest economic profit. 

Our Advantages

a.Strong technology research and development team
b.Strong sales team
c.Factory area of vast
d.Ever export many country in the world, we have many case of succesfully

1.We are professional manufacturer for gas/diesel generator set, over 20 years produced experience;
2.Products range of gas engines/genset, including diesel engines, biomass generator sets, natural gas generator sets, biogas generator sets, coal mine gas generator set, etc.Products arrange from 5kw-3000kw ;
3.Our workshop covering more than 40000 square meters, techincal engineer and after-service more than 100 people.Also products achieved CE,ISO9001:2008,ISO2001:1400 etc.Certificats.And passed many patents.
4.Our products are well received by our customers in Spain, Italy, Canada, Venezuela, Austraila, Thailand, Malaysia,Philippine,Indonesia,and with some Africa countries etc.
5.We have many cooperation companies :Like dehydration equipment,desulfurization equipment,gasified equipment,recovery system exhaust heat,CCHP system etc.So can offer you complete project proposal if you like. 


Delivery Details:
FOB Port:Qingdao
FOB Range:US$ 78000 - US$ 98000 per unit (Sets)
Lead Time:20 - 28 days

Payment Details:
Payment Terms:Telegraphic Transfer in Advance (Advance TT, T/T)
Minimum Order:1 Sets