About Lvhuan Power
CE approved 10kw-1000kw methane gas power generator coal bed gas generator
+20 years professional manufacturer.
2. Wide power range: 10kw-5000kw gas generator, single or parallel running.
3. Multi-option of engine, alternator, control system and cooling system, PLC control panel.
4. Long continuous running hours, 8000 hours per year.
5. CE & ISO approved
6. OEM provided
7. Holding many patents
8. Perfect service system(Sales, Installation, Debugging and after-sale service)
Product Features
Main spare parts:
1. Control system: America Woodward control system
2. Controller: ComAp, Deepsea, Woodward
3. Ignition system: American ALTRONIC, including:magneto, high-tension coil
4. Starting system: DC 24V electric motor.
5. Mixer: IMPCO
6. Spark plug: STITT
Main technical parameters:
| Parameter of coal bed gas Generator Set |
| Model Number (Engine Type) |
500GF-WK/500GF-WK1/600GF-WK1 |
| Engine No.( 500GF-WK/500GF-WK1) |
G12V190ZLDW-2 |
| Engine No.(600GF-WK1) |
G12V190ZLDW-3 |
| Brand Name |
LVHUAN |
| Prime power |
400KW/400KW/480KW |
| Standby power |
500KW/500KW/600KW |
| Gas Mixed Mode |
Outside |
| Rated Speed |
1000rpm |
| Rated Frequency |
50/60Hz |
| Rated Voltage |
400V/230V |
| Rated Current |
902A/902A/1080A |
| Phase |
AC 3-Phase, 4 wire |
| Voltage Stability |
≤±2% |
| Voltage transient |
≤±10% |
| Voltage Stable time |
≤1s |
| Heat consumption |
≤9.8mj/kw.h |
| Cylinder Number |
12 |
| Cylinder Bore |
190mm |
| Stroke |
210mm |
| Starting System |
DC 24V electric motor |
| Cooling method |
Water cooler |
| Lubricant method |
Passive and flying lubricant |
| Isolation class |
H |
| Protection |
IP23 |
| Alternator |
Siemens, Standford, Leroy Somer, Marathon, etc. |
| Power Factor |
0.8 lagging |
| Exciting method |
brushless |
| Colour |
your choice |
| Certificates |
ISO 9001:2008, CE |
| Warranty |
1 year/10000h |
| Overheal Time |
3years/30000h |
| Type |
Open |
| Control system |
Automatic alarm system |
| Size |
5600*2040*2780mm |
| Weight |
11800kg |
The Genset pictures:
Genset worksite requirements
The worksite needs to meet following basic requirements:
a) Ambient temperature between -40ºC~40ºC;
b) Relative humidity less than 95%(35ºC);
c) Site elevation not higher than 3500m;
d) For outdoor installation, simple rain shelter is required.
Gas requirements of genset
1.Pressure of natural gas: 3-20kPa
2.Gas Temperature≤40 ºC
3. H2S≤200mg/Nm³
4. Impurities particle size≤5μm, impurity content≤30mg/Nm³
5. Moisture Cotent≤40mg/Nm³
6. If the CH4 covers less than 30%, the total content of CH4 and O2 should not less than 28% together, the content of O2 should not less than 16%.
Purification of natural gas has a significant impact on machine life and continuous running time!
Service committee:
1. Pre-sale service:
1) We will send our engineer to prospect the site of power station free of charge.
2) According to the situation of site, we will provide design drawings, such as power plant floor drawing, cooling system drawing, genset foundation, control room design, etc.
2. Sale service:
1) Operator training would be conducted by Lvhuan technicians during the process of commissioning or Factory training course in China,
2) Installation and commission of the genset would be instructed assisted by Lvhuan technicians at site.
3. After-sale service:
1) We have strong after-sale team, we will response within 24 hours and provide technical supports by phone or site guiding, help our clients to gain the biggeset profit.
2) For the quality problem, we will service for you free of charge during the guarantee period.
3) We provide one year guarantee period and lifetime service.
Plentiful spare part supply:
1. We have spart parts department, plentiful spare part supply for all genset model will guarantee genset lifetime running.
2.All parts were from original factories or professional factories,complete in specification, keep good quality.
FAQS:
1. Are you factory? and where is your factory?
Yes, we are. Our factory is located in Zhangqiu Longshan subdistrict, Jinan city, Shandong province, Welcome to visit our factory.
2. How to choose the right model?
To choose a right model, we need to know required continuous output power, local voltage and frequency and fuel (such as diesel, natural gas, biogas, biomass gas, coal gas, syngas, etc.). For biomass power plant and coal gas power plant, some clients may doesn't have gasification system, then we need information about raw material.
3. What's the genset warranty?
The warranty is one year. We will offer free service and spare parts during warranty period. Lifetime service will be provided by our trustworthy after-sale team.
4. How to do the maintenance?
Operator training will be provided by our technician. After training, local operator can do the basic maintenance by themselves according to our maintenance manual.
5. Will be operation training offered?
Yes, operator training would be conducted by our technicians during the process of commissioning or factory training course in China.
6. What's about the installation and commissioning?
Installation and commissioning of the genset would be instructed assisted by our technicians on site.
7. What is your regular delivery time?
30 days after order releasing.
PLEASE FEEL FREE TO CONTACT ME FOR ANY QUESTION
Sarah Tian
Phone: +86 18678896956
Audited Supplier 
){kind=link}