| Customization: | Available |
|---|---|
| After-sales Service: | One Year |
| Warranty: | 12 Months |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
1) 1m distance away from genset's pressure regulating valve of inlet
2) Temperature of bio gas ≤40°C
3) Pressure of natural gas 3-20kPa, velocity of pressure: ≤1kPa/minute
4) H2S: ≤200mg/Nm3
5) NH3: ≤20mg/Nm3
6) Ratio of CH4 in biogas not less than 45%, changing rate: ≤2%/minute
7) Impurities particle size: ≤5μm, impurity content: ≤30mg/Nm3
8) Moisture content of biomass: ≤40g/Nm3
Capacity: 3.0-4.0kW/H per cubic meter gas
Power supply range: 400kw 600kw 800kw
More than 1 set can be paralleled
Standard component and assembly
Multi-option of control panel
Certifications: CE and ISO
efficiency of generating electricity: 42%
| Model Number (Engine Type) | LH-400/600/800T |
| rated Power | 400kW/600KW/800KW |
| Rated Speed | 1500/1800rpm |
| Rated Frequency | 50/60Hz |
| Rated Voltage | 220/380V, 400/230, 415/240V |
| Phase | AC 3-phase, 4 wire |
| Heat consumption | ≤9.8mj/kW.h |
| Lubricant Consumption | ≤1.0g/kW.h |
| displacement | 17.5-35dM3 |
| Cylinder Number | 8\12\16 |
| Cylinder Bore | 132mm |
| Stroke | 160mm |
| Starting System | 24V DC electric motor |
| Cooling Method | Water cooler |
| Lubricant Method | Passive and flying lubricant |
| Type | Four stroke, water cooled, turbocharged and after cooled, spark plug ignition |
| Alternator | siemens |
| Power Factor | 0.8 lagging |
| Isolation Class | H |
| Protection | IP23 |
a. How to choose the right model?
1) Before your inquiry, please tell us the demand continuous power it is (kW)
2) Local voltage (V)and frequency (Hz)
3) Fuel is it like: diesel, natural gas, biogas, biomass gas, coal gas and syngas
4) If fuel is biogas, please tell does the biogas already
5) If yes best provide gas analysis report
b. Genset warranty?
Warranty is one year or 1000 hours
c. How to do the maintenance?
Operator training will be provided by our technician
After training, local operator can do the basic maintenance by themselves according to our maintenance manual
d. What is the overhaul?
About 30,000 working hours, week is enough to finish
){kind=link}