400kw Natural Gas Generator/LPG Power Plant with All German Origin Control Unit

Product Description

400kw Natural Gas Generator/LPG Power Plant with All German Origin Control Unit

Product Description

Natural Gas---its main component is CH4,which takes 90% of the whole content.Thermal efficiency of conversion is 65%, which is same to the LPG and higher than Coal; Calculated on the same calorific value, the price of natural gas is lower than the price of coal and petroleum. 
Lvhuan Natural Gas Generator starts quickly, be operated easily, with complete set of safety system, and can be as power device and electricity device for oil field and local companies. 
Scope of Application:
Gas electricity generation, using pure and high-LHV natural gas to provide stable, continous and large amounts of electricity.

Core Features:

Ignition system: American ALTRONIC. 
Starting system: DC24V electric motor. 
Mixer: IMPCO(USA)  
Controller: Deepsea, Smartgen
Automatic control system: Automatic control plate and ATS fully automatic switch between generator and national grid.
Woodward technology: Adopted Woodward lean burning technology, Woodward speed adjusting system
Starting system: DC24V electric motor.
Mixer: IMPCO
Sparking plug: STITT
Engine Control System: Woodward(USA), HEINZMANN(Germany)
Electric Control System: Deepsea(UK)
Alternator: Siemens, LEROY-SOMER, Marathon  

Worksite requirements

a. Ambient temperature between -40ºC~40ºC;
b. Relative humidity less than 95%(35ºC);
c. Site elevation not higher than 2500m;
d. For outdoor installation, simple rain shelter is required.
 
Gas requirements:
Within 1m from pressure regulating valve of gas intake
The ratio of CH4 in natural gas ≥70%
Pressure of natural gas: 80-200kpa, rate of pressure change ≤ 1kpa/min
H2S ≤ 20mg/Nm3
Impurity particle size ≤ 5μm, impurity content ≤ 30mg/Nm3
Moisture content ≤ 40g/Nm3

Product Parameters

 

Model Number (Engine Type)	LHNG400
Brand Name	LVHUAN
Prime Power/Standby Power	400KW
Rated Speed	1000/1200RPM
Rated Frequency	50/60Hz
Rated Voltage	400V/230V
Phase	AC 3-Phase, 4 wire
Voltage Stability	≤±2%
Voltage transient	≤±10%
Voltage Stable time	≤1s
Heat consumption	≤11mj/kw.h
Lubricant Consumption	≤1.0g/kw.h
Engine Capacity	32L
Cylinder Number	12-V
Cylinder Bore	190mm
Stroke	210mm
Starting System	DC 24V electric motor
Cooling method	water cooler
Lubricant method	Passive and flying lubricant
Isolation class	H
Protection	IP23
Alternator	Siemens
Power Factor	0.8 lagging
Exciting method	brushless
Colour	your choice
Certificates	ISO 9001:2008, CE
Warranty	1 year or 1000 running hours which arrives first
Type	Open
Control system	Automatic alarm system
Size	5300x1970x2170mm
Weight	8200kg

 
 

Company Profile

Since 2008
Factory area over 40000m2
Starff over 260 employees
Technicians over 100 people

 

Our Advantages

Advanced configuration keep accurate ans stable working condition under high speed working speed
High generalization, easy maintenance, low maintenance cost.
Economical, low operating cost
Reduced the carbon deposition on the wear of the engine cylinder and the valve to prolong the using life of the genset.
Adopt one of the world's most advanced gas control technology, fully available to the characteristics of fuel gas.
Powerful low pressure gas SPI (single point Injection) system used for various supercharger premixed engine.
Suitable for differnt concentration methane and propane, variety of quality gas.
Precise air-fuel ratio rarefied combustion control and Generator speed/load control
Realize lean burn, reduce the intake pipe tempering and improved efficient to reduce the heat load.

Service committee:

pre-sale service:
1) We will send our engineer to prospect the site of power station free to charge.
 
2) According to the situation of site we can supply you many drawings:like power station floor 
plan,engineering flow sheet of circle cooling system,genset installation,genset foundation,electrical connection and some other techincal support etc.
 
Sale service:
1) we will send our engineer to the site to guide you the installation of generator set, subsystem and relative equipment.
 
2) We will debug the generator set till it can generate power successfully.
 
3) We will also supply a technical training to the operators.Orcan send your staff to our company.We can train you till you can operate the generator set.
 
After-sale service:
1) Our every engineers are in charge of different area,we will response periodically and support you technical service free of charge,
 
2) For the quality problem, we will service for you free of charge during the guarantee period.
 
3) One year guarantee period and lifetime service.
 
4) we solve quality problem in time when genset doesn't work,We insure to help our clients to gain the biggest economic profit.

Accessories:
1) Application scope of the Accessories, such as 12v190, 8v190, 6190, 6135 and other engine types. 
2.)All parts were from original factories or professional factories, complete in specification, keep good quality. 

FAQ

1.How to choose the right model?
A: It depends on real output power, Voltage, Frequency and gas type. 

2.What is the oil consumption and capacity per hour?
A: 1.0g of lubricant oil consumption per hour.
1.0 Cubic meter gas can produce3.5-4.0kw/h power. 
The capacity depends on gas energy.       
        
3. What is the warranty?A: 1 year. Inside this 1 year, we offer all spare parts free of charge. After this period, spare  parts are not free. But, a set of spare parts will be shipped together with machine free.

4.. How is the service?
A: We offer installation,repair and maintain service abroad. And online guide service if needed anytime. Our before-sale, in-sale and after-sale service are all trustable, you can name it.

Any questions, please contact me freely.