| Customization: | Available |
|---|---|
| After-sales Service: | One Year |
| Warranty: | 12 Months |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Main spare parts:
Ignition system: American ALTRONIC, including:magneto, high-tension coil,
Starting system: DC24V electric motor.
Mixer: IMPCOSparking plug: STITT
Sincerely welcome to visit our factory and build future cooperation relationship.
|
Natural Gas Generator |
|||||
|
Gen-set mode |
Prime power |
Continuous power |
Engine Mode |
Displacement |
|
|
LHNG10 |
10kw |
8kw |
LH2100 |
1.80L |
|
|
LHNG20 |
20kw |
16kw |
LH4100 |
3.61L |
|
|
LHNG30 |
30kw |
24kw |
LH4105 |
4.32L |
|
|
LHNG40 |
40kw |
32kw |
LH6105 |
6.45L |
|
|
LHNG50 |
50kw |
40kw |
LH4135 |
8.58L |
|
|
LHNG60 |
60kw |
48kw |
LH4135 |
8.58L |
|
|
LHNG70 |
70kw |
56kw |
LH6135 |
12.8L |
|
|
LHNG80 |
80kw |
64kw |
LH6135 |
12.8L |
|
|
LHNG90 |
90kw |
72kw |
LH6135 |
12.8L |
|
|
LHNG100 |
100kw |
80kw |
LH6135 |
12.8L |
|
|
LHNG120 |
120kw |
100kw |
LH12V135 |
25.75L |
|
|
LHNG150 |
150kw |
120kw |
LH12V135 |
25.75L |
|
|
LHNG180 |
180kw |
144kw |
LH12V135 |
25.75L |
|
|
LHNG200 |
200kw |
160kw |
LH12V135 |
25.75L |
|
|
LHNG300 |
300kw |
240kw |
LH6190 |
35.70L |
|
|
LHNG400 |
400kw |
320kw |
LH12V190 |
71.45L |
|
|
LHNG500 |
500kw |
400kw |
LH12V190 |
71.45L |
|
|
Parameter of natural gas generator |
|||||
|
Rate Voltage |
400V/230V |
||||
|
Phase |
3Phase 4 wires |
||||
|
Rate Frequency |
50HZ/60HZ |
||||
|
Power Factor |
0.8 |
||||
|
Voltage Regulating Range |
95%-105% |
||||
|
Voltage Steady State |
≤±2% |
||||
|
Voltage Transient State |
≤±10% |
||||
|
Voltage Settling |
≤1S |
||||
|
Voltage Volatility |
≤±0.5% |
||||
|
Frequency Steady State Regulation Rate |
≤0.5% |
||||
|
Frequency Transient State Regulation Rate |
≤±10% |
||||
|
Heat Consumption |
10mj/kw.h |
||||
|
Pressure |
5-20kpa |
||||
|
Intake Mode |
Natural intake |
||||
|
Sparking Mode |
Sparking plug |
||||
|
Voltage Regulation Mode |
automatic |
||||
|
Speed Regulation Mode |
Electronic speed regulation |
||||
|
Lubricating Mode |
Pressure and splash |
||||
|
Cooling Mode |
Closed/open circulating water cooling |
||||
|
Starting Mode |
24V electric motor |
||||
|
Overhaul Time |
≥30000h |
||||
|
Noise |
≤105aB(A) |
||||
|
Exhaust Temperature |
≤650°C |
||||
The worksite needs to meet following basic requirements:
a) Ambient temperature between -40ºC~40ºC;
b) Relative humidity less than 95%(35ºC);
c) Site elevation not higher than 2500m;
d) For outdoor installation, simple rain shelter is required.
Gas requirements
1m from genset's pressure regulating valve of inlet
1. Pressure of natural gas: 80~300kPa
2. CH4 content of natural gas≥70%
3. H2S≤20mg/Nm3
4. Impurities particle size≤5μm, impurity content≤30mg/Nm3
Purification of natural gas has a significant impact on machine life and continuous running time!
1. Pre-sale service:
1) We will send our engineer to prospect the site of power station free of charge.
2) According to the situation of site, we will provide design drawings, such as power plant floor drawing, cooling system drawing, genset foundation, control room design, etc.
2. Sale service:
1) Operator training would be conducted by Lvhuan technicians during the process of commissioning or Factory training course in China,
2) Installation and commission of the genset would be instructed assisted by Lvhuan technicians at site.
3. After-sale service:
1) We have strong after-sale team, we will response within 24 hours and provide technical supports by phone or site guiding, help our clients to gain the biggeset profit.
2) For the quality problem, we will service for you free of charge during the guarantee period.
3) We provide one year guarantee period and lifetime service.
Plentiful spare part supply
1. We have spart parts department, plentiful spare part supply for all genset model will guarantee genset lifetime running.
2.All parts were from original factories or professional factories,complete in specification,keep good quality.
){kind=link}