pipeline gas engine 1000kw natural gas generator Worksite requirements
The worksite needs to meet following basic requirements:
a) Ambient temperature between -40ºC~45ºC;
b) Relative humidity less than 90%(35ºC);
c) Site elevation not higher than 2000m;
d) For outdoor installation, simple rain shelter is required.
The engine is high,/low temperature cycle requires the use of softened water.Cooling water should be used in slightly alkaline cleaning water, not compounds containing corrosive, such as chlorides, sulphates or acid etc..Its main index requirements are as follows:
hardness:0.7~5.3me/L ;chloride ion content:<150mg/L;PH≤7~8.5
The genset will be able to output at its full power with fuel gas with the specification as below:
1m distance away from genset's pressure regulating valve of inlet
1)Temperature of natural gas ≤40ºC;
2)Pressure of natural gas 80~200kPa, velocity of pressure≤ 1kPa/min;
3)H2S≤20mg/Nm3;
4)the ratio of CH4 in natural gas not less than 70%
5)Impurities particle size≤5μm; impurity content≤30mg/Nm3;
6)Moisture Content of biomass ≤40g/Nm3;
If fuel gas contains higher quantity of sulfur and ammonia,it not only corrodes the pole of spark plug seriously,but also increases the acid value,which corrodes internal parts of genset and corrodes the genset with precipitates.
Our Advantages
1. over 15 years gas/diesel generator produced experience; 2. main products include: diesel engines, biomass generator, natural gas generator , biogas generator , coal gas generator set, etc. Products arrange from 5kw-3000kw ;
3. Our workshop covering more than 40000 square meters, techincal engineer and after-service more than 100 person.
4. CE,ISO9001:2008,ISO2001:1400,SGSetc.certificats approve and passed many patents.
5. exported many countries such as: Spain, Italy, Canada, Venezuela, Austraila, Thailand, Malaysia,Philippine,Indonesia,and with some Africa countries etc.
6.we provide TURN-KEY project : like water removal system,H2S removal system,gasified equipment,recovery system of exhaust heat,CCHP system etc.
7.machine have long serive-life: more than 15 years
Product Parameters
| Model of generating sets |
1200GF-T |
| Brand |
Jichai |
| Model of engine |
H16V190ZLT-2 |
| Model of alternator |
1FC6506-4LA42 |
| Rated capacity |
1500KVA |
| Rated power |
1200KW |
| Continuous power |
1000KW |
| Rated speed |
1000 r/min. |
| CH4 Requirement |
≥70% |
| H2S Requirement |
≤15ppm |
| Gas pressure |
≥7kpa |
| H2O |
no liquid state water vapour in natural gas |
| Rated voltage |
400/230V |
| Rated frequency |
50Hz |
| Rated power factor |
0.8 |
| Supply method |
3 phases 4 lines |
| Excitation method |
Brushless |
| Starting method |
24V DC starter 24V or Air motor |
| Cooling method |
Closed |
| Speed modulate method |
Electronic control |
| Net weight kg |
21000kg |
| Overall dimension L×B×H(mm) |
7150×2180×2421(mm) |
2.Main electrical performance data
| Voltage |
Stable regulating rate |
±2.5% |
| Instantaneous regulating rate |
≤±20% |
| Recovery time |
≤2s |
| Fluctuation |
≤1% |
| Frequency |
Stable regulating rate |
0~5% |
| Instantaneous regulating rate |
≤±10% |
| Recovery time |
7s |
| Fluctuation |
≤1% |
3.Main technical data of engine
| Model of engine |
H16V190ZLT-2 |
| Brand |
Jichai |
| Rated power/speed |
1320KW/1000rpm |
| Overall dimension L×B×H |
3830×2060×2315(mm) |
| Net weight |
13000kg |
| Specific oil consumption |
≤1.0g/KW.h |
| Number and layout of cylinders |
16cylinder, 60° V type |
| Type |
Four stroke, water cooled, turbocharged and aftercooled, spark plug ignition |
| Bore |
190mm |
| Stroke |
215mm |
| Total displacement |
97.53L |
| Compression ratio |
10:1 |
| Direction of rotation (facing to end) |
Counter-Clockwise |
| Lubricating method |
Pressure and splash lubrication |
4.main technical data of generator
| Model of alternator |
1FC6506-4LA42 |
| Brand |
Siemens series |
| Supply method |
3 phases 4 lines |
| Excitation method |
Brushless |
| Rated power factor |
0.8 |
| Rated power |
1200kw |
| Rated voltage |
400/230V |
| Rated speed |
1000 r/min. |
| Rated frequency(hz) |
50 |
| Class of insulation |
F |
| Protection grade |
IP23 |
| Voltage regulation mode |
AVR automatic |
Generator Set photos:
Service committee:
1.pre-sale service:
(1)We will send our engineer to prospect the site of power station free to charge.
(2)According to the situation of site we can supply you many drawings.
2.Sale service:
(1)we will send our engineer to the site to guide you the installation of generator set, subsystem and relative equipment.
(2)We will debug the generator set till it can generate power successfully.
(3)We will also supply a technical training to the operators.Or send your staff to our company train you till you can operate the generator set.
3.After-sale service:
(1)our engineers are in charge of different area,we will response periodically and support you technical service free of charge.
(2)For the quality problem, we will service for you free of charge during the guarantee period.
(3)One year guarantee period and lifetime service.
(4)we solve quality problem in time when genset doesn't work,We insure to help our clients to gain the biggest economic profit.
4.Spare parts service:
(1)Please provide parts No.s We can supply to you all engine/generator spare parts as your demand,
(2)All parts were from original factories or professional factories,complete in specification,keep good quality.
FAQ
1. delivery time?
according to load power ,normal is 30-120days.
2. Do you have CE?
Yes, our generator approve CE,ISO9001,ISO14001,SGS etc.
3. What the Engine brand it is?
Engine brand :Lvhuan.
we are professional manufacturer for gas engine over 20 years.Our gas engine have achieve 15 patents.
4. What is the intake gas system ?
USA WOODWARD or German HEINZMANN.
5. What's your generator advantage?
1)Alternator using STANFORD or SIEMENS
2)EGIS Liner
3)Altronic Spark plug
4)ProAct actuators
5)Tecjet control valve and mixer
6)Operation cost is very low about USD167can generating 1kw.h and low maintenance cost
Audited Supplier 
){kind=link}