| Customization: | Available |
|---|---|
| After-sales Service: | 1 Year |
| Warranty: | 12 Months |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Manufacturer supply
Power supply range:20-500kw
Continuous supply range: 16-500kw
1.3-1.8kw biomass produce 1kw.h power
Standard component and assembly
Multi-option of control panel
With CE and ISO certificate
Biomass generator specification :
Voltage and Frequency: 400V/230V, 440V/254V,480V,600V 6.3KV,10.5KV, 50/60HZ
Fuel: Agro and forestry waste, woodchips, sawdust, wood pellets, rice husk, wheat straw, peanuts shell, grass...
|
Engine Capacity |
161-215L |
|
Cylinder Number |
6-8 |
|
Cylinder Diameter |
300mm |
|
Range |
380mm |
|
Heat consumption |
≤11.38mj/kw.h |
|
Oil consumption |
≤1.03g/kw. |
Biomass generator photos:
The work site needs to meet following basic requirements:
a) Ambient temperature between -40ºC~40ºC;
b) Relative humidity less than 95%(35ºC);
c) Site elevation not higher than 2500m;
d) For outdoor installation, simple rain shelter is required.
Fuel gas requirement:
The generator set will be able to output at its full power with fuel gas with the specification as below:
1m distance away from generator set's pressure regulating valve of inlet
Temperature of syn gas ≤40ºC;
Pressure of syn gas 5~20kPa, velocity of pressure≤ 1kPa/min;
H2S≤200mg/Nm3;
NH3≤20mg/Nm3;
Coke tar content≤20mg/Nm3;
Impurities particle size≤5μm; impurity content≤30mg/Nm3;
Moisture Content of syn gas ≤40g/Nm3;
biomass gas calorific value≥4.2MJ/Nm3.
Purification of biomass gas have a significant impact on machine life and continuous running time!
1.Pure copper water tank for best cooling effect
2.Famous component brand to ensure overall quality
3.Expansion fitting combined with shrinking fitting give high tightness to the system
4.Safety guarantee form electromagnetic valve as well as back-fire relief valve
5.Residual heat CHP recycle system available for choice.
Biomass generator Supply details:
Ignition system:We adopt ignition system of magneto which produced by American ALTRONIC company,including:magneto,high-tension coil,sparking plug.
Starting system: DC24V electric motor,12v190 adopt ST710 of direct-current.
Pressure charging system:Pulse Mixed-flow supercharger, compression ration is 1:8,meet engine's requirement for gas-flow rate.
Speed regulating system: EGS gas controller of American WOODWARD Company.
1.How to choose the right model?
A: It depends on real output power, Voltage, Frequency and gas type.
2.What is the oil consumption and capacity per hour?
A: 1.0-1.63g of lubricant oil consumption per hour.
1.0 Cubic meter gas can produce1.5-4.0kw/h power.
The capacity depends on gas energy.
E.g 1.0 Cubic meter natural gas produce about 3.5kw/h
3.What is the overhaul?
A: About 30000 working hours. A week is enough to finish.
4. What is the warranty?A: 1 year. Inside this 1 year, we offer all spare parts free of charge. After this period, spare parts are not free. But, a set of spare parts will be shipped together with machine free.
5. How is the service?
A: We offer installation,repair and maintain service abroad. And online guide service if needed anytime. Our before-sale, in-sale and after-sale service are all trustable, you can name it.
Any questions, please contact me freely.
){kind=link}