CE/ISO Certified 400 Kw Coal Gas

• Customization: Available
• After-sales Service: One Year
• Warranty: 1 Year
• Gas Source: Natural Gas
• Certification: CE, ISO
• Power: ＜50kW
• Standard: Standard
• Starting Mode: 24V Electric Motor
• Ignition Mode: Plug Ignition
• Transport Package: Plastic Film Cover or Plywood Box
• Specification: check with us
• Trademark: LVHUAN
• Origin: China
• HS Code: 8502200000
• Production Capacity: 100PCS/Month

Product Description

Parameter of 400KW Coal Gas Generator 
 

Model No.	LH-400GFL
Engine No.	12V190DT-2
Gas Mixing Type	Outside
Rated Power	400KW
Prime power	320KW
Rated Voltage	400V/230V
Phase	3 phase , 4 wire
Rated Frequency	50Hz
Rated Speed	1000r/min
Power factor	0.8
Rated Current	720A
Voltage regulating range	95-105%
Voltage Steady State	≤ ± 2%
Voltage Transient State	≤ ± 10%
Voltage setling time	≤ 1S
Voltage volatility	≤ ± 0.5%
Frequency Steady State Regulation rate	≤ 0.5%
Frequency Transient State Regulation rate	≤ ± 10%
Heat consumption	≤ 11.38mj/kw.h
Lubricant Consumption	1.0~1.63g/kw.h
Pressure	3-20kpa
Cylinder Number	12-V
Cylinder Diameter	190mm
Stroke	210mm
Intake Mode	naturally aspirated
Ignition mode	plug ignition
Pressure regulation mode	Automatic
Speed regulation mode	electronic speed regulate
Lubricating mode	pressure and splash
Cooling mode	closed/open cooling
Starting mode	24V electronic  motor
Overhaul time	≥ 30000h
Noise	≤ 105dB ( A )
Exhaust Temperature	≤ 650ºC
Displacement	71.45L
Size (mm)	6000x1970x2235mm
Weight	11000kg

Gas requirements:
The coal gas must be purified before burning in engine:
1. Gas temperature≤ Local temperature + 15º C(≤ 40º C is better)
2. Gas Pressure can be adjusted from 5-20 kPa, the changing pressure rate ≤ 1kPa/min.
3. Use low-sulfur coal, one set sulfur scrubber is necessary (H2S≤ 200mg/Nm3)
4. NH3≤ 20mg/Nm3
5. Tar and Particulate matter≤ 50mg/Nm3.
6. Diameter of Particulate matter≤ 5μ M, particulate content≤ 30mg/Nm3.
7. Moisture content≤ 40g/Nm3
10. Heat Value of coal gas: ≥ 4.2Mj/ Nm3.

Service committee
1. Pre-sale service:
1) We will send our engineer to prospect the site of power station free of charge.
2) According to the situation of site, we will provide design drawings, such as power plant floor drawing, cooling system drawing, genset foundation, control room design, etc.

2. Sale service:
1) Operator training would be conducted by Lvhuan technicians during the process of commissioning or Factory training course in China,
2) Installation and commission of the genset would be instructed assisted by Lvhuan technicians at site.

3. After-sale service:
1) We have strong after-sale team, we will response within 24 hours and provide technical supports by phone or site guiding, help our clients to gain the biggeset profit.
2) For the quality problem, we will service for you free of charge during the guarantee period.
3) We provide one year guarantee period and lifetime service.

Welcome to consult if anything unclear !