| Customization: | Available |
|---|---|
| After-sales Service: | One Year |
| Warranty: | 12 Months |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Requirements of coal gas gemset :
Within 1m from gas intake valve
(1). Coal Gas temperature ≤ 40ºC
(2). Pressure 3-10kpa, pressure changing rate ≤ 1kpa/min
(3). H2S ≤ 200mg/Nm35
(4). NH3 ≤ 20mg/Nm3
(5). Tar content ≤50mg/Nm3
(6). Impurity particle size ≤ 5μm, impurity content ≤ 30mg/Nm3
(7). Moisture content ≤ 40g/Nm3
(8). Gas heat value ≥ 4.2MJ/Nm3
| Model No. | LH-400GFL |
| Engine No. | 12V190DT-2 |
| Gas Mixing Type | Outside |
| Rated Power | 400KW |
| Prime power | 320KW |
| Rated Voltage | 400V/230V |
| Phase | 3 phase , 4 wire |
| Rated Frequency | 50Hz |
| Rated Speed | 1000r/min |
| Power factor | 0.8 |
| Rated Current | 720A |
| Voltage regulating range | 95-105% |
| Voltage Steady State | ≤ ± 2% |
| Voltage Transient State | ≤ ± 10% |
| Voltage setling time | ≤ 1S |
| Voltage volatility | ≤ ± 0.5% |
| Frequency Steady State Regulation rate | ≤ 0.5% |
| Frequency Transient State Regulation rate | ≤ ± 10% |
| Heat consumption | ≤ 11.38mj/kw.h |
| Lubricant Consumption | 1.0~1.63g/kw.h |
| Pressure | 3-20kpa |
| Cylinder Number | 12-V |
| Cylinder Diameter | 190mm |
| Stroke | 210mm |
| Intake Mode | naturally aspirated |
| Ignition mode | plug ignition |
| Pressure regulation mode | Automatic |
| Speed regulation mode | electronic speed regulate |
| Lubricating mode | pressure and splash |
| Cooling mode | closed/open cooling |
| Starting mode | 24V electronic motor |
| Overhaul time | ≥ 30000h |
| Noise | ≤ 105dB ( A ) |
| Exhaust Temperature | ≤ 650ºC |
| Displacement | 71.45L |
| Size (mm) | 6000x1970x2235mm |
| Weight | 11000kg |
1. Generator set would be covered with plastic film cover ;
2. Control panel, batteries, electric cables are packed with plywood boxes;
3. Exhaust pipes, engine mufflers are put in the container without packing.
1. Pre-sale service:
A.Our engineers are available for onsite prospect before installation free to charge.
B. Foundation drawing and detailed Dimension free form us.
2. In-sale service:
A. Onsite overall guide installation,operation and maintenance training .
B. Assistance and instruction of trial running.
3. After-sale service:
A.Our engineers are in charge of different area,we will response periodically and support you
technical service free of charge,
B.Free of charge for the quality problem during the guarantee period.
C.One year guarantee period and lifetime service.
4. Spare parts service:
A.All spares parts on our gensets supplied by us.
B. Free spare parts together with genset when shipping.
1. Enalbing high-, medium-and low-voltage output, which lowers the initial investment and operation cost.
2. Continuous and stable rated can be put out with assurance of the great cylinder diameter.
3. Low-speed rotation lengthens the service life of the engine sets.
4. The unsupercharged sets with natural aspiration are suitable for a wide range of gas and have a low error rate.
5. The in-line structure simplifiers the layout of the engines and facilitates maintenance.
6. There are several defense lines to guarantee safe and efficient use of fuel gas.
7. The surplus heat is recycled to realize the utility of cogeneration.
8. The computerized monitoring management system enables online monitoring and automatic control.
){kind=link}