| Customization: | Available |
|---|---|
| After-sales Service: | One Year |
| Warranty: | 12 Months |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
The worksite needs to meet following basic requirements:
a) Ambient temperature between -40ºC~45ºC;
b) Relative humidity less than 90%(35ºC);
c) Site elevation not higher than 2000m;
d) For outdoor installation, simple rain shelter is required.
generator of gas requirement:
1m distance away from genset's pressure regulating valve of inlet
1)Temperature of biogas ≤40ºC;
2)Pressure of biogas 3~20kPa, velocity of pressure≤ 1kPa/min;
3)H2S≤20mg/Nm3;
4)the ratio of CH4 in biogas not less than 40%
5)Impurities particle size≤5μm; impurity content≤30mg/Nm3;
6)Moisture Content of biogas ≤40g/Nm3;
| Model Number (Engine Type) | LHBG1000 |
| Brand Name | LVHUAN |
| Prime Power/Standby Power | 1000KW |
| Rated Speed | 1500RPM |
| Rated Frequency | 50/60Hz |
| Rated Voltage | 400V/230V |
| Phase | AC 3-Phase, 4 wire |
| Voltage Stability | ≤±2% |
| Voltage transient | ≤±10% |
| Voltage Stable time | ≤1s |
| Heat consumption | ≤11mj/kw.h |
| Lubricant Consumption | ≤1.0g/kw.h |
| Engine Capacity | 12.9L |
| Cylinder Number | 6-V |
| Cylinder Bore | 190mm |
| Stroke | 210mm |
| Starting System | DC 24V electric motor |
| Cooling method | water cooler |
| Lubricant method | Passive and flying lubricant |
| Isolation class | H |
| Protection | IP23 |
| Alternator | Siemens |
| Power Factor | 0.8 lagging |
| Exciting method | brushless |
| Colour | your choice |
| Certificates | ISO 9001:2008, CE |
| Warranty | 1 year or 1000 running hours which arrives first |
| Type | Open |
| Control system | Automatic alarm system |
| Size | 2850x1100x1750mm |
| Weight | 3900kg |
Manufacturer supply
Power supply range:10kw - 1100kw
Continuous supply range: 8kw -900kw
Standard component and assembly
Multi-option of control panel
With CE and ISO certificate
Capcaity: 1CBM biogas generate 1.5-2.5kw.h power
1CBM natural gas generate 3.0-4.0 kw.h power
generator CHP:
CHP system,short for Combined Heat & Power is a simultaneous production of cooling, heating and power system with efficiency of about 90%.
When the generator is working, theheat will be offered at the same time, it is the utilizing separate unit for hospital,office building,living apartment,breeding enterprise, vegetable green house etc.
The energy source for CCHP system:
Exhaust gas: The water will get heat form needle tubing when flows through the recovery devices of exhaust gas. And the needle tube's function is to conduct heat form gas, is fixed at the recovery device of exhaust gas. During the process, the water temperature will be heated up to 50~90ºC. Another result is the heated water becomes saturated steam under certain pressure.
The heat recovery efficiency will takes about 20-30% of total heat consumption of genset. But total gas exhaust heat takes about 32%.
Cylinder water : the cooling water( jacket water and oil cooling water) gathered together is another hot water source for CCHP system. This part of heat recovery takes about 32% of total heat consumption of genset.
generator CHP Application:
1.Heating &bathing
2.Warming the anaerobic tank to increase biogas capacity.
3.Drying the starch
4.Production of vapour
5.Cooling model of air condition for building and household.
1.Pure copper water tank for best cooling effect
2.Famous component brand to ensure overall quality
3.Expansion fitting combined with shrinking fitting give high tightness to the system
4.Safety guarantee form electromagnetic valve as well as back-fire relief valve
5.Residual heat CHP recycle system available for choice.
Ignition system:We adopt ignition system of magneto which produced by American ALTRONIC company,including:magneto,high-tension coil,sparking plug.
Starting system: DC24V electric motor,12v190 adopt ST710 of direct-current.
Pressure charging system:Pulse Mixed-flow supercharger, compression ration is 1:8,meet engine's requirement for gas-flow rate.
Speed regulating system: EGS gas controller of American WOODWARD Company.
1.How to choose the right model?
A: It depends on continuous output power, Voltage, Frequency and fuel type. Please tell me what fuel (natural gas, biogas, biomass gas,wood syngas, methane,coal gas) or raw material(like wood, grass, nutshell and so on) The right model of generator will be recommend soon.
Me and our engineers are always available at your service.
2.What is the oil consumption and capacity per hour?
A: 1.0-1.63g of lubricant oil consumption per hour.
1.0 Cubic meter gas can produce 1.5-2.5kw/h
3.What is the overhaul?
A: About 30000 working hours. A week is enough to finish. We offer manual for weekly, monthly and overhaul maintenance.
4. How is the after sale service and maintenance?
A: We offer installation,repair and maintain service abroad. And online guide service if needed anytime. Our before-sale, in-sale and after-sale service are all trustable, you can name it.
5. What products we offer?
Biomass gasifier,Biomass/syngas generator,biogas generator,Natural gas(CNG,LNG) / methane generator,Coal gas generator,Diesel generator.
Generators can parallel together to form large power, E.g. 5 sets 400kw biomass generator form 2000kw biomass generator system.
1.Pre-sale service:
A.Our engineers are available for onsite prospect before installation free to charge.
B. Foundation drawing and detailed Dimension free form us.
2.Sale service:
A. Onsite overall guide installation,operation and maintenance training .
B. Assistance and instruction of trial running.
3.After-sale service:
A. 24 hours online or in person after sale service.
B.12 months warranty. We take care of all errors/breakdowns in this period.
4.Spare parts service:
A.All spares parts on our gensets supplied by us.
B. Free spare parts together with genset when shipping.
Any questions, please contact me freely.
){kind=link}