Coal Gas Generator Famous Brand from China to Russia
Product Parameters
| Parameter of Coal Gas Generator Set |
| Model Number (Engine Type) |
LHCG400 |
| Brand Name |
LVHUAN |
| Prime Power/Standby Power |
320KW/400KW |
| Rated Speed |
1000/1200RPM |
| Rated Frequency |
50/60Hz |
| Rated Voltage |
400V/230V |
| Phase |
AC 3-Phase, 4 wire |
| Voltage Stability |
≤±2% |
| Voltage transient |
≤±10% |
| Voltage Stable time |
≤1s |
| Heat consumption |
≤11mj/kw.h |
| Lubricant Consumption |
≤1.0g/kw.h |
| Engine Capacity |
71.4 L |
| Cylinder Number |
12-V |
| Cylinder Bore |
190mm |
| Stroke |
210mm |
| Starting System |
DC 24V electric motor |
| Cooling method |
water cooler |
| Lubricant method |
Passive and flying lubricant |
| Isolation class |
H |
| Protection |
IP23 |
| Alternator |
Siemens |
| Power Factor |
0.8 lagging |
| Exciting method |
brushless |
| Colour |
your choice |
| Certificates |
ISO 9001:2008, CE |
| Warranty |
1 year or 1000 running hours which arrives first |
| Type |
Open |
| Control system |
Automatic alarm system |
| Size |
6200x2100x2650mm |
| Weight |
12000kg |
Worksite requirements:
The worksite needs to meet following basic requirements:
A) Ambient temperature between -40º C~40º C;
B) Relative humidity less than 95%(35º C);
C) Site elevation not higher than 2500m;
D) For outdoor installation, simple rain shelter is required.
Gas requirements:
The coal gas must be purified before burning in engine:
1. Gas temperature≤ Local temperature + 15º C(≤ 40º C is better)
2. Gas Pressure can be adjusted from 5-20 kPa, the changing pressure rate ≤ 1kPa/min.
3. Use low-sulfur coal, one set sulfur scrubber is necessary (H2S≤ 200mg/Nm3)
4. NH3≤ 20mg/Nm3
5. Tar and Particulate matter≤ 50mg/Nm3.
6. Diameter of Particulate matter≤ 5μ M, particulate content≤ 30mg/Nm3.
7. Moisture content≤ 40g/Nm3
10. Heat Value of coal gas: ≥ 4.2Mj/ Nm3.
Service
1. Pre-sale service:
1) We will send our engineer to prospect the site of power station free of charge.
2) According to the situation of site, we will provide design drawings, such as power plant floor drawing, cooling system drawing, genset foundation, control room design, etc.
2. Sale service:
1) Operator training would be conducted by Lvhuan technicians during the process of commissioning or Factory training course in China,
2) Installation and commission of the genset would be instructed assisted by Lvhuan technicians at site.
3. After-sale service:
1) We have strong after-sale team, we will response within 24 hours and provide technical supports by phone or site guiding, help our clients to gain the biggeset profit.
2) For the quality problem, we will service for you free of charge during the guarantee period.
3) We provide one year guarantee period and lifetime service.
Plentiful spare part supply
1. We have spart parts department, plentiful spare part supply for all genset model will guarantee genset lifetime running.
2. All parts were from original factories or professional factories, complete in specification, keep good quality.
FAQ
1. How to choose the right model ?
A : It depends on continuous output power, Voltage, Frequency and fuel type.
Please tell me what fuel (natural gas, biogas, biomass gas,wood syngas, methane,coal gas) or raw material (like wood, grass, nutshell etc) The right model of generator will be recommend soon .
B : Our sales and engineers are always available at your service.
2. What is the oil consumption and capacity per hour ?
A : 1.0-1.63g of lubricant oil consumption per hour.
1.0 Cubic meter gas can produce 1.5 - 3.0 kw/h power. The capacity depends on gas energy(Kcal). E.g 1.0 Cubic meter natural gas produce about 3.0-4.0kw/h
3. What is the overhaul ?
A : About 30000 working hours.
One week is enough to finish. We offer manual for weekly, monthly and overhaul maintenance.
4. What is the warranty ?
A : One year.
we offer all spare parts free of charge during warranty period. After this period, spare parts are not free. What's more, a set of spare parts will be shipped together with generator set free of charge.
5. How is the after sale service and maintenance?
A:We offer installation,repair and maintain service abroad. And online guide service if needed anytime. Our before-sale, in-sale and after-sale service are all trustable, you can name it.
6. What products we offer ?
Biomass gasifier,Biomass/syngas generator,biogas generator,Natural gas(CNG,LNG) / methane generator,Coal gas generator,Diesel generator.
Product picture
Audited Supplier 
){kind=link}