400kw Natural Gas Generator Electric Generator Set with Lvhuan Generator

• Customization: Available
• After-sales Service: One Year
• Warranty: 12 Months
• Model NO.: LHNG400
• Gas Source: Natural Gas
• Certification: CE, TLC, ISO, CCC
• Power: ＞200kW
• Standard: Standard
• Model Number (Engine Type): Lhng400
• Brand Name: Lvhuan
• Prime Power/Standby Power: 320kw/400kw
• Rated Speed: 1000/1200rpm
• Rated Frequency: 50/60Hz
• Rated Voltage: 400V/230V
• Phase: AC 3-Phase, 4 Wire
• Lubricant Method: Passive and Flying Lubricant
• Isolation Class: H
• Transport Package: in Wooden Package
• Specification: CE ISO
• Trademark: Lvhuan
• Origin: Zhangqiu, Shandong
• HS Code: 85022000
• Production Capacity: 100pieces/Month

Product Description

Natural Gas---its main component is CH4,which takes 90% of the whole content.Thermal efficiency of conversion is 65%, which is same to the LPG and higher than Coal; Calculated on the same calorific value, the price of natural gas is lower than the price of coal and petroleum. Natural gas is used by civil use, generation, industrial chemicals and industrial fuel etc. it's a good substitute of coal and petroleum. It can take instead of civil coal gas; it can be used as nitrogenous fertilizer instead of coal and petroleum; it can be used as ethylene instead of naphtha; it can be used as the car engine fuel instead of petroleum.
Natural Gas Generator, fueled mainly by natural gas and LPG, is widely used in regions or areas with abundant oil field and natural gas. Global electrical power demand will be 80% higher by 2040, with gas becoming a key energy source for EP generation. The unit starts quickly, be operated easily, with complete set of safety system, and can be as power device and electricity device for oil field and local companies.
 
 
Core spare parts:
Ignition system: American ALTRONIC. 
Controller: Comap, Deepsea, Smartgen
Automatic control system: Automatic control plate and ATS fully automatic switch between generator and national grid.
Woodward technology: Adopted Woodward lean burning technology, Woodward or ComAp speed adjusting system
Starting system: DC24V electric motor.
Mixer: IMPCO
Sparking plug: STITT
 

Worksite requirements

Genset worksite requirements:
1). Ambient temperature between -40ºC~40ºC;
2). Relative humidity less than 95%(35ºC);
3). Site elevation not higher than 2500m;
4). For outdoor installation, simple rain shelter is required.
 
Gas requirements:
1m from genset's pressure regulating valve
1). Temperature of biomass≤40ºC;
2). Pressure of biomass: 5~20kPa, velocity of pressure≤ 1kPa/min;
3). H2S≤200mg/Nm3;
4). NH3≤20mg/Nm3;
5). Coke tar content≤20mg/Nm3;
6). Impurities particle size≤5μm; impurity content≤30mg/Nm3;
7). Moisture Content of biomass ≤40g/Nm3;
8). Biomass calorific value≥4.2MJ/Nm3.
Purification of biomass gas has a significant impact on machine life and continuous running time!
 

Product Parameters

 

Parameter of Natural Gas Generator Set
Model Number (Engine Type)	LHNG400
Brand Name	LVHUAN
Prime Power/Standby Power	320KW/400KW
Rated Speed	1000/1200RPM
Rated Frequency	50/60Hz
Rated Voltage	400V/230V
Phase	AC 3-Phase, 4 wire
Voltage Stability	≤±2%
Voltage transient	≤±10%
Voltage Stable time	≤1s
Heat consumption	≤11mj/kw.h
Lubricant Consumption	≤1.0g/kw.h
Engine Capacity	71.4 L
Cylinder Number	12-V
Cylinder Bore	190mm
Stroke	210mm
Starting System	DC 24V electric motor
Cooling method	water cooler
Lubricant method	Passive and flying lubricant
Isolation class	H
Protection	IP23
Alternator	Siemens
Power Factor	0.8 lagging
Exciting method	brushless
Colour	your choice
Certificates	ISO 9001:2008, CE
Warranty	1 year or 1000 running hours which arrives first
Type	Open
Control system	Automatic alarm system
Size	6200x2100x2650mm
Weight	12000kg

 
 

Generator Set photos:

High Configuration
--Ignition system: ALTRONIC(USA)
--Starting system: DC24V electric motor. 
--Mixer: IMPCO(USA)  
--Sparking plug:STITT
--Engine Control System: Woodward(USA), HEINZMANN(Germany)
--Electric Control System: ComAp(Czech), Deepsea(UK)
--Alternator: Siemens, LEROY-SOMER, Marathon  

Certificate:
We have CE, ISO14001, ISO9001 and CEC certificate to keep the good quality. Please contact us for more details. 
 
 

Service committee:

      (1) 24 hours- technology support service and the promptly reply
   
      (2) Professional engineer team and strong technology support
 
      (3) Customized design based on real situation 
   
      (4) Detailed and professional layout drawing, installation drawing and other drawing required by the customers supplied
   
      (5)  Engineer service on site

      (6)  Free training in Factory

      (7)  Equipment test before delivery

      (8)  One year guarantee period and lifetime service
 
      (9)  Spare parts lifetime supplied

 Accessories:
1) Application scope of the Accessories, such as 12v190, 8v190, 6190, 6135 and other engine types. 
2.)All parts were from original factories or professional factories, complete in specification, keep good quality.