Customization: | Available |
---|---|
After-sales Service: | 12 Months |
Warranty: | One Year |
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
Requirements for biomass gas:
Within 1m from pressure regulating value of gas intake;
Gas temperature<40ºC
The ratio of CH4 in natural gas >70%;
Pressure of natural gas: 3--10 kpa, rate of pressure change <1 kpa/min;
H2S≤200mg/Nm3;
NH3≤20mg/Nm3;
Tar content≤20mg/ Nm3;
Moisture content ≤40g/Nm3;
Impurity particle size ≤5µm, impurity content ≤30 mg/Nm3
Heat value≥4.2MJ/Nm3
Ignition system:We adopt ignition system of magneto which produced by American ALTRONIC company,including:magneto,high-tension coil,sparking plug.
Starting system: DC24V electric motor,12v190 adopt ST710 of direct-current.
Pressure charging system:Pulse Mixed-flow supercharger, compression ration is 1:8,meet engine's requirement for gas-flow rate.
Speed regulating system:EGS gas controller of American WOODWARD Company.
scope of application:Biogas generator set is widely used in the many area where can generate biogas,
like rubbish landfill,livestock excrement disposal,industrial organism disposal.
Biomass gas generator list | ||||
Genset Mode | Prime power | Continuous power | Engine Mode | Displacement |
LHBMG10 | 10kw | 8kw | LH2100 | 1.80L |
LHBMG20 | 20kw | 16kw | LH4100 | 3.61L |
LHBMG30 | 30kw | 24KW | LH4105 | 4.32L |
LHBMG40 | 40KW | 32KW | LH6105 | 6.45L |
LHBMG50 | 50KW | 40KW | LH4135 | 8.58L |
LHBMG60 | 60KW | 48KW | LH4135 | 8.58L |
LHBMG70 | 70KW | 56KW | LH6135 | 12.8L |
LHBMG80 | 80KW | 64KW | LH6135 | 12.8L |
LHBMG90 | 90KW | 72KW | LH6135 | 12.8L |
LHBMG100 | 100KW | 80KW | LH6135 | 12.8L |
LHBMG120 | 120KW | 96KW | LH12V135 | 25.75L |
LHBMG140 | 140KW | 115KW | LH12V135 | 25.76L |
LHBMG150 | 150KW | 120KW | LH12V135 | 25.75L |
LHBMG180 | 180KW | 144KW | LH12V135 | 25.75L |
LHBMG200 | 200KW | 160KW | LH12V135 | 25.75L |
LHBMG250 | 250KW | 200KW | LH12V190 | 35.75L |
LHBMG300 | 300KW | 240KW | LH12V190 | 35.75L |
LHBMG350 | 350KW | 280KW | LH12V190 | 35.75L |
LHBMG400 | 400KW | 320KW | LH12V190 | 71.45L |
LHBMG500 | 500KW | 400KW | LH12V190 | 71.45L |
LHBMG600 | 600KW | 480KW | LH12V190 | 71.45L |
Parameter of biomass gas generator | ||||
Rate Voltage | 400V/230V | |||
Phase | 3Phase 4 wires | |||
Rate Frequency | 50HZ/60HZ | |||
Power Factor | 0.8 | |||
Voltage Regulating Range | 95%-105% | |||
Voltage Steady State | ≤±2% | |||
Voltage Transient State | ≤±10% | |||
Voltage Settling | ≤1S | |||
Voltage Volatility | ≤±0.5% | |||
Frequency Steady State Regulation Rate | ≤0.5% | |||
Frequency Transient State Regulation Rate | ≤±10% | |||
Heat Consumption | 9.8mj/kw.h | |||
Pressure | 5-20kpa | |||
Intake Mode | Natural intake | |||
Sparking Mode | Sparking plug | |||
Voltage Regulation Mode | automatic | |||
Speed Regulation Mode | Electronic speed regulation | |||
Lubricating Mode | Pressure and splash | |||
Cooling Mode | Closed/open circulating water cooling | |||
Starting Mode | 24V electric motor | |||
Overhaul Time | ≥20000h | |||
Noise | ≤105aB(A) | |||
Exhaust Temperature | ≤650°C |
1. Pre-sale service:
1) We will send our engineer to prospect the site of power station free of charge.
2) According to the situation of site, we will provide design drawings, such as power plant floor drawing, cooling system drawing, genset foundation, control room design, etc.
2. Sale service:
1) Operator training would be conducted by Lvhuan technicians during the process of commissioning or Factory training course in China,
2) Installation and commission of the genset would be instructed assisted by Lvhuan technicians at site.
3. After-sale service:
1) We have strong after-sale team, we will response within 24 hours and provide technical supports by phone or site guiding, help our clients to gain the biggeset profit.
2) For the quality problem, we will service for you free of charge during the guarantee period.
3) We provide one year guarantee period and lifetime service.
Plentiful spare part supply
1. We have spart parts department, plentiful spare part supply for all genset model will guarantee genset lifetime running.
2.All parts were from original factories or professional factories,complete in specification,keep good quality.