1. Company Introduction:
Since 2008
Factory area over 40000m
2
Technicians over 100 people
Website lvhuanpower.en.made-in-china.com
2. Advantage:
Strong structure & Strengthen accessories
Super performance of electric speed governer & Gas pressure regulation system
Auto voltage regulation & Stable working condition
Long using life and low-operation cost
Easy Start & Auto start
High quality & imported & accurate gas control system
Low requirement on gas heat value for easy generation
Strong control system anti-interference ability
3. Requirements For Natural Gas Genset Working Condition:
Within 1m from pressure regulating valve of gas intake
Gas temperature ≤ 40ºC
Pressure 3-20kpa, pressure changing rate ≤ 1kpa/min
H2S ≤ 200mg/Nm3
NH3 ≤ 20mg/Nm3
CH4 content ≥40%, changing rate ≤ 2%min
Impurity particle size ≤ 5μm, impurity content ≤ 30mg/Nm3
Moisture content ≤ 40g/Nm3
4. Parameter of 300kw Natural gas generator set:
Model |
LHNG300 |
Standard |
JB/T9583.1-99 |
Engine model |
LH6190 |
Alternator model |
Brushless /IP23/3PH 4Wire) |
Machine power |
240KW/300KVA |
Rate voltage |
400V / 220V (adjustable) |
Rate frequency |
50/60Hz |
Rate power factor |
0.8 |
Rate speed |
1000r/min |
Speed regulation mode |
Automatic |
Voltage regulation mode |
Automatic |
Operation model |
Auto/Manual |
Cooling mode |
Open/close water cooling |
Start mode |
24V DC electric motor |
5. Parameter of 300kw Natural engine:
Engine mode |
LH6190 |
Sparking mode |
Sparking pl |
Gas mixing type |
IMPCO |
Heat Consumption |
≤10MJ/kW.H |
Cylinder number&type |
6 & Link |
EGT |
≤650ºC |
Cylinder diameter |
190mm |
Stroke |
210mm |
Displacement |
35.75L |
Lubrication |
Pressure and splash |
Rate speed |
1000rpm |
Cooling model |
Open/closed water cooling |
Emissions targets |
EU 3 |
Noise |
≤105dB |
6. Service:
6.1. Pre-sale service:
(1) We will send our engineer to prospect the site of power station free to charge.
(2) According to the situation of site we can supply you many drawings:Like power station floor plan,
Engineering flow sheet of circle cooling system,genset installation,genset foundation,electrical connection and some other techincal support etc.
6.2. Sale service:
(1) We will send our engineer to the site to guide you the installation of generator set, subsystem and
Relative equipment.
(2) We will debug the generator set till it can generate power successfully.
(3) We will also supply a technical training to the operators.Orcan send your staff to our company.We can train you till you can operate the generator set.
6.3. After-sale service:
(1) Our every engineers are in charge of different area,we will response periodically and support you
Technical service free of charge,
(2) For the quality problem, we will service for you free of charge during the guarantee period.
(3) One year guarantee period and lifetime service.
(4) We solve quality problem in time when genset doesn't work,We insure to help our clients to gain the
biggest economic profit.
Detailed Photos




