| Customization: | Available |
|---|---|
| After-sales Service: | One Year |
| Warranty: | 1 Year or 1000 Hours |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
The worksite needs to meet following basic requirements:
A) Ambient temperature between -40º C~45º C;
B) Relative humidity less than 90%(35º C);
C) Site elevation not higher than 2000m;
D) For outdoor installation, simple rain shelter is required.
The engine is high, /low temperature cycle requires the use of softened water. Cooling water should be used in slightly alkaline cleaning water, not compounds containing corrosive, such as chlorides, sulphates or acid etc...Its main index requirements are as follows:
Hardness: 0.7~5.3me/L; Chloride ion content: <150mg/L; PH≤ 7~8.5
Fuel gas requirement for wood pellet electric generator
The genset will be able to output at its full power with fuel gas with the specification as below:
1m distance away from genset's pressure regulating valve of inlet
Temperature of natural gas ≤ 40º C;
Pressure of natural gas 3~10kPa, velocity of pressure≤ 1kPa/min;
H2S≤ 200mg/Nm3;
NH3≤ 20mg/Nm3
Tar Content ≤ 20%mg/Nm3
Impurities particle size≤ 5μ M; Impurity content≤ 30mg/Nm3;
Moisture Content of biomass ≤ 40g/Nm3; Heat value more than 4.2MJ/Nm3
If fuel gas contains higher quantity of sulfur and ammonia, it not only corrodes the pole of spark plug seriously, but also increases the acid value, which corrodes internal parts of genset and corrodes the genset with precipitates.
| Model Number (Engine Type) | LHBMG20-600 |
| Brand Name | LVHUAN |
| Prime Power/Standby Power | 16KW/20KW-500kw/600kw |
| Rated Speed | 1500/1800RPM |
| Rated Frequency | 50/60Hz |
| Rated Voltage | 400V/230V |
| Phase | AC 3-Phase, 4 wire |
| Voltage Stability | ≤±2% |
| Voltage transient | ≤±10% |
| Voltage Stable time | ≤1 |
| Heat consumption | ≤9.8mj/kw.h |
| Lubricant consumption | ≤1.63g/kw.h |
| Engine Capacity | 3.4L-29.7L |
| Cylinder Number | 4-12 |
| Cylinder Bore | 105mm-190MM |
| Stroke | 135mm-210MM |
| Starting System | DC 24V electic motor |
| Cooling method | water cooler |
| Lubricant method | Passive and flying lubricant |
| Isolation class | H |
| Protection | IP23 |
| Alternator | ENGGA |
| Power Factor | 0.8 lagging |
| Exciting method | brushless |
| Colour | your choice |
| Certificates | ISO 9001:2008, CE |
| Warranty | 1 year or 1500 running hours |
| Type | Open |
| Control system | Automatic alarm system |
(1)in our company, different people is in charge of different area, we will response periodically and support you technical service free of charge, include equipment debugging, fault eliminating, technical advice, maintenance assistant, etc.
(2)For the quality problem, we will service for you free of charge during the guarantee period.
(3)One year guarantee period and lifetime service.
(4)Insisting on principle of "solving problems first, trying to recover the generator set as soon as possible and then analysis the reason", we solve quality problem in time when genset doesn't work, We insure to help our clients to gain the biggest economic profit.
){kind=link}