China Hot Sale 700kw Natural Genertor Set for Sale

• Customization: Available
• After-sales Service: One Year
• Warranty: One Year
• Model NO.: LH-700GFT
• Gas Source: Natural Gas
• Certification: CE, TLC, ISO, CCC
• Power: ＞200kW
• Standard: Standard
• Model Number (Engine Type): Lhng500
• Brand Name: Lvhuan
• Prime Power/Standby Power: 400kw/500kw
• Rated Speed: 1000/1200rpm
• Rated Frequency: 50/60Hz
• Rated Voltage: 400V/230V
• Phase: AC 3-Phase, 4 Wire
• Voltage Stability: ≤±2%
• Voltage Transient: ≤±10%
• Voltage Stable Time: ≤1s
• Transport Package: in Wooden Package
• Specification: CE ISO
• Trademark: Lvhuan
• Origin: Zhangqiu, Shandong
• HS Code: 8502200090
• Production Capacity: 100pieces/Month

Product Description

1.Product introduction
Natural Gas---its main component is CH4,which takes 90% of the whole content.Thermal efficiency of conversion is 65%, which is same to the LPG and higher than Coal;Calculated on the same calorific value, the price of natural gas is lower than the price of coal and petroleum.Natural gas is used by civil use, generation, industrial chemicals and industrial fuel etc.It's a good substitute of coal and petroleum.It can take instead of civil coal gas;It can be used as nitrogenous fertilizer instead of coal and petroleum;It can be used as ethylene instead of naphtha;It can be used as the car engine fuel instead of petroleum.
Natural Gas Generator, fueled mainly by natural gas and LPG, is widely used in regions or areas with abundant oil field and natural gas.Global electrical power demand will be 80% higher by 2040, with gas becoming a key energy source for EP generation.The unit starts quickly, be operated easily, with complete set of safety system, and can be as power device and electricity device for oil field and local companies.

2.Core spare parts:
Ignition system:American ALTRONIC.
Controller:Comap, Deepsea, Smartgen
Automatic control system:Automatic control plate and ATS fully automatic switch between generator and national grid.
Woodward technology:Adopted Woodward lean burning technology, Woodward or ComAp speed adjusting system
Starting system:DC24V electric motor.
Mixer:IMPCO
Sparking plug:STITT

3.Genset worksite requirements:
A.Ambient temperature between -40ºC~40ºC;
B.Relative humidity less than 95%(35ºC);
C.Site elevation not higher than 2500m;
D.For outdoor installation, simple rain shelter is required.

4.Gas requirements:
1m from genset's pressure regulating valve
A.Temperature of biomass≤40ºC;
B.Pressure of biomass:5~20kPa, velocity of pressure≤ 1kPa/min;
C.H2S≤200mg/Nm3;
D.NH3≤20mg/Nm3;
E.Coke tar content≤20mg/Nm3;
F.Impurities particle size≤5μm;Impurity content≤30mg/Nm3;
G.Moisture Content of biomass ≤40g/Nm3;
H.Biomass calorific value≥4.2MJ/Nm3.
Purification of biomass gas has a significant impact on machine life and continuous running time!

5.Company Introduction
Since 2008
Factory area over 40000m2
Starff over 260 employees
Technicians over 100 people
Website lvhuanpower.en.made-in-china.com

6.Scope of Application
Gas electricity generation, using pure and high-LHV natural gas to provide stable, continous and large amounts of electricity.

7.Advantage
--Advanced configuration keep accurate ans stable working condition under high speed working speed
--High generalization, easy maintenance, low maintenance cost.
--Economical, low operating cost
--Reduced the carbon deposition on the wear of the engine cylinder and the valve to prolong the using life of the genset.
--Adopt one of the world's most advanced gas control technology, fully available to the characteristics of fuel gas.
--Powerful low pressure gas SPI (single point Injection) system used for various supercharger premixed engine.
--Suitable for differnt concentration methane and propane, variety of quality gas.
--Precise air-fuel ratio rarefied combustion control and Generator speed/load control
--Realize lean burn, reduce the intake pipe tempering and improved efficient to reduce the heat load.

8.Requirements For Natural Gas Genset Working Condition
  Within 1m from pressure regulating valve of gas intake

--The ratio of CH4 in natural gas ≥70%
--Pressure of natural gas:80-200kpa, rate of pressure change ≤ 1kpa/min
--H2S ≤ 20mg/Nm3
--Impurity particle size ≤ 5μm, impurity content ≤ 30mg/Nm3
--Moisture content ≤ 40g/Nm3

9.High Configuration
--Ignition system:ALTRONIC(USA)
--Starting system:DC24V electric motor.
--Mixer:IMPCO(USA)
--Sparking plug:STITT
--Engine Control System:Woodward(USA), HEINZMANN(Germany)
--Electric Control System:ComAp(Czech), Deepsea(UK)
--Alternator:Siemens, LEROY-SOMER, Marathon

Parameter of Natural Gas Generator Set
Model Number (Engine Type)	LHNG500
Brand Name	LVHUAN
Prime Power/Standby Power	400KW/500KW
Rated Speed	1000/1200RPM
Rated Frequency	50/60Hz
Rated Voltage	400V/230V
Phase	AC 3-Phase, 4 wire
Voltage Stability	≤±2%
Voltage transient	≤±10%
Voltage Stable time	≤1s
Heat consumption	≤11mj/kw.H
Lubricant Consumption	≤1.0g/kw.H
Engine Capacity	71.4L
Cylinder Number	12-V
Cylinder Bore	190mm
Stroke	210mm
Starting System	DC 24V electric motor
Cooling method	Water cooler
Lubricant method	Passive and flying lubricant
Isolation class	H
Protection	IP23
Alternator	Siemens
Power Factor	0.8 lagging
Exciting method	Brushless
Colour	Your choice
Certificates	ISO 9001:2008, CE
Warranty	1 year or 1000 running hours which arrives first
Type	Open
Control system	Automatic alarm system
Size	6200X2100X2800mm
Weight	12500kg

10.Certificate
We have CE, ISO14001, ISO9001 and CEC certificate to keep the good quality.Please contact us for more details.

11.Service
(1) 24 hours- technology support service and the promptly reply
(2) Professional engineer team and strong technology support
(3) Customized design based on real situation
(4) Detailed and professional layout drawing, installation drawing and other drawing required by the customers supplied
(5)  Engineer service on site
(6)  Free training in Factory
(7)  Equipment test before delivery
(8)  One year guarantee period and lifetime service
(9)  Spare parts lifetime supplied

12.Accessories
1) Application scope of the Accessories, such as 12V190, 8V190, 6190, 6135 and other engine types.
2.)All parts were from original factories or professional factories, complete in specification, keep good quality.

13.FAQ
1. How to choose the right model? 
 A: It depends on continuous output power, Voltage, Frequency and fuel type.  Please tell me what fuel (natural gas, biogas, biomass gas,wood syngas, methane,coal gas) or raw material(like wood, grass, nutshell and so on) The right model of generator will be recommend soon.
Me and our engineers are always available at your service.
 
 2. What is the oil consumption and capacity per hour? 
 A: 1.0-1.63g of lubricant oil consumption per hour. 
1.0 Cubic meter gas can produce 1.5- 3.0kw/h power. The capacity depends on gas energy(Kcal). E.g 1.0 Cubic meter natural gas produce about 3.0-4.0kw/h  
 
3. What is the overhaul? 
 A: About 30000 working hours. A week is enough to finish.  We offer manual for weekly, monthly and overhaul maintenance.
 
4. What is the warranty? 
 A: 1 year. Inside this 1 year, we offer all spare parts free of charge. After this period, spare      parts are not free. What's more, a set of spare parts will be shipped together with generator set free of charge.  
 
5. How is the after sale service and maintenance? 
A: We offer installation,repair and maintain service abroad. And online guide service if needed anytime. Our before-sale, in-sale and after-sale service are all trustable, you can name it.
 
6. What products we offer?
Biomass gasifier,Biomass/syngas generator,biogas generator,Natural gas(CNG,LNG) / methane generator,Coal gas generator,Diesel generator.
Generators can parallel together to form large power, E.g. 5 sets 400kw biomass generator form 2000kw biomass generator system.