Thermoelectric generator 20kw - 1000kw syngas biomass electric generator
1. Thermoelectric generator 20kw - 1000kw syngas biomass electric generatorcore features:
1) Low cost in maintenance
2) Large cylinder , Long Stroke, Low Speed, which means big reserve power capacity and constant power output
3) Low Engine Speed at 500 or 600RPM
4) Naturally Aspirated, which means low failure rate and minimaldowntime
5) Internal MixingSystem (for high hydrogengas)
6) Strong Treatment and Resistance AbilityAgainst TAR
7) Long Overhaul Time of 60000hours and lifecycle of 20-25 years
8) CE and ISO approved
2. Main technical parameters for thermoelectric generator 20kw - 1000kw syngas biomass electric generator:
Syngas
Engine |
Item |
Technical specifications |
| Model |
6300D/M |
8300D/M-1 |
8300D/M-2 |
| Type |
In-line, four-stroke, inter-cooling, spark plug ignition, open combustion |
| Cylinder number |
6 |
8 |
8 |
| Cylinder diameter (mm) |
300 |
| Rated speed (r/min) |
500 |
500 |
600 |
| Rated power (KW) |
400 |
500 |
550 |
| Heat consumption at rated power (MJ/kwh) |
≤11.0 |
| Rotating direction (from flywheel side) |
Clockwise |
| Starting mode |
Compressed air/motor start |
| Exhaust temperature (ºC) |
≤600 |
| Gas pressure (kPa) |
≥2.5 |
| Gas inlet temperature (ºC) |
≤40 |
| Oil consumption rate (g/kW.h) |
≤0.8 |
| Generator set |
Model |
350GFM |
400GFM |
500GFM |
| Rated power (kw) |
350 |
400 |
500 |
| Voltage (V) |
400/6300/10500 |
| Current (A) |
631/40/24 |
722/46/28 |
902/57/34 |
| Power factor (COSΦ) |
(lagging) |
| Excitation mode |
Brushless |
| Phase and connection |
3 phase 4 wires/3 phase 6 wires |
| Size (L*W*H) (mm) |
5800*1600*2900 |
6400*1600*2900 |
6400*1600*2900 |
| Weight (kg) |
18000 |
22000 |
22000 |
3. Environment requirements for thermoelectric generator 20kw - 1000kw syngas biomass electric generator:
1) Ambient temperature between -20°C~+40°C;
2) Relative humidity less than 90%(20ºC);
3) Site elevation not higher than 2500m;
4) For outdoor installation, simple rain shelter is required.
4. Thermoelectric generator 20kw - 1000kw syngas biomass electric generator quality requirements:
1) Gas temperature≤40°C
2) Gas pressure 2.5~10kpa, Pressure change rate≤1kPa/min
3) Tar content≤20mg/Nm3
4) H2S content≤50mg/Nm3
5) Impurities particle size≤5μm, Impurity content≤30mg/Nm3
6) Moisture content≤20 mg/Nm3
7) Heat value≥4MJ/Nm3.
5. Syngas/biomass generator photos:
6. Spare parts of biomass generator syngas generator:
7. Syngas/biomass/coal power plant/refinery off-gas plant successful cases:
8. FAQ:
1. How to choose the right model?
To choose a right model, we need to know required continuous output power, local voltage and frequency and fuel (such as diesel, natural gas, biogas, biomass gas, coal gas, syngas, etc.). For biomass power plant and coal gas power plant, some clients may doesn't have gasification system, then we need information about raw material.
2. What's the warranty?
The warranty is one year. We will offer free service and spare parts during warranty period. Lifetime service will be provided by our trustworthy after-sale team.
3. How to do the maintenance?
Operator training will be provided by our technician. After training, local operator can do the basic maintenance by themselves according to our maintenance manual.
4. Will be operation training offered?
Yes, operator training would be conducted by our technicians during the process of commissioning or factory training course in China.
5. What's about the installation and commissioning of biomass electric generator?
Installation and commissioning of the genset would be instructed assisted by our technicians on site.
Welcome to ask for question and quoation!
Audited Supplier 
){kind=link}