Combined Heat and Power CHP Plant 500kw - 2MW LPG Natural Gas Generator
Natural Gas Generator Set simple description:
This type of generator is choose gas as power. Gas will be burned directly inside of engine's cylinders, then give machinery force to alternator to produce electricity power. There are mainly 3 parts on one generator set: gas engine,alternator and radiator. The generated power can be connect to national grid, or for daily use and industrial use.
Natural Gas generator set core Features:
Manufacturer supply
Power supply range:10kw - 1100kw
Continuous supply range: 8kw -900kw
Standard component and assembly
Multi-option of control panel
With CE and ISO certificate
Natural gas generator set specification:
Power factor: 0.8
Rated Voltage and Rated Frequency: 400V/230V, 50/60HZ
Voltage Stabilized Regulation: ≤ ± 1.5%
Frequency Fluctuation Ratio: ≤ ± 1%
Insulation Class: H
Fuel: natural gas, methane, biogas
Capacity:1CBM natural gas produce 3.0-4.0KW.H power
Natural gas generator set parameter:
Model Number |
LHNG10-1100 |
Prime power |
8-900kw |
Rated Power |
10-1100 kw |
Rated Speed |
1000/1500rpm |
Rated Frequency |
50/60 Hz |
Rated Voltage |
400/230V |
Phase |
AC 3 phase 4 wire |
Starting system |
24V DC electric motor |
Cooling method |
water cooler |
Lubricant method |
passive and splash |
Isolation class |
H |
Protection |
IP23 |
Power Factor |
0.8 lagging |
Exciting method |
Brush less |
Voltage Stability |
≤±2% |
Voltage Transient |
≤±10% |
Voltage Stable time |
≤1 s |
Engine Capacity |
1.81-95.45L |
Cylinder Number |
2-16 |
Cylinder Diameter |
100-190mm |
Range |
115-210mm |
Heat consumption |
≤9.8mj/kw.h |
Oil consumption |
≤1.63g/kw. |
CHP for Natural Gas Generator Set:
CHP system,short for Combined
Heat & Power is a simultaneous production of cooling, heating and power system with efficiency of about 90%.
When the generator is working, theheat will be offered at the same time, it is the utilizing separate unit for hospital,office building,living apartment,breeding enterprise, vegetable green house etc.
The energy source for CHP system:
Exhaust gas: The water will get heat form needle tubing when flows through the recovery devices of exhaust gas. And the needle tube's function is to conduct heat form gas, is fixed at the recovery device of exhaust gas. During the process, the water temperature will be heated up to 50~90ºC. Another result is the heated water becomes saturated steam under certain pressure.
The heat recovery efficiency will takes about 20-30% of total heat consumption of genset. But total gas exhaust heat takes about 32%.
Cylinder water : the cooling water( jacket water and oil cooling water) gathered together is another hot water source for CHP system. This part of heat recovery takes about 32% of total heat consumption of genset.
CHP Application:
1.Heating &bathing
2.Warming the anaerobic tank to increase biogas capacity.
3.Drying the starch
4.Production of vapour
5.Cooling model of air condition for building and household.
Natural gas generator set features:
1.Pure copper water tank for best cooling effect
2.Famous component brand to ensure overall quality
3.Expansion fitting combined with shrinking fitting give high tightness to the system
4.Safety guarantee form electromagnetic valve as well as back-fire relief valve
5.Residual heat CHP recycle system available for choice.
CHP gas generator Supply details:
Ignition system:We adopt ignition system of magneto which produced by American ALTRONIC company,including:magneto,high-tension coil,sparking plug.
Starting system: DC24V electric motor,12v190 adopt ST710 of direct-current.
Pressure charging system:Pulse Mixed-flow supercharger, compression ration is 1:8,meet engine's requirement for gas-flow rate.
Speed regulating system: EGS gas controller of American WOODWARD Company.
FAQ-Natural Gas Generator Set :
1.How to choose the right model?
A: It depends on continuous output power, Voltage, Frequency and fuel type. Please tell me what fuel (natural gas, biogas, biomass gas,wood syngas, methane,coal gas) or raw material(like wood, grass, nutshell and so on) The right model of generator will be recommend soon.
Me and our engineers are always available at your service.
2.What is the oil consumption and capacity per hour?
A: 1.0-1.63g of lubricant oil consumption per hour.
1.0 Cubic meter gas can produce 0.5-5.0kw/h power. The capacity depends on gas energy(Kcal). E.g 1.0 Cubic meter natural gas produce about 3.0-4.0kw/h
3.What is the overhaul?
A: About 30000 working hours. A week is enough to finish. We offer manual for weekly, monthly and overhaul maintenance.
4. How is the after sale service and maintenance?
A: We offer installation,repair and maintain service abroad. And online guide service if needed anytime. Our before-sale, in-sale and after-sale service are all trustable, you can name it.
5. What products we offer?
Biomass gasifier,Biomass/syngas generator,biogas generator,Natural gas(CNG,LNG) / methane generator,Coal gas generator,Diesel generator.
Generators can parallel together to form large power, E.g. 5 sets 400kw biomass generator form 2000kw biomass generator system.
Our Services
1.Pre-sale service:
A.Our engineers are available for onsite prospect before installation free to charge.
B. Foundation drawing and detailed Dimension free form us.
2.Sale service:
A. Onsite overall guide installation,operation and maintenance training .
B. Assistance and instruction of trial running.
3.After-sale service:
A. 24 hours online or in person after sale service.
B.12 months warranty. We take care of all errors/breakdowns in this period.
4.Spare parts service:
A.All spares parts on our gensets supplied by us.
B. Free spare parts together with genset when shipping.
Any questions, please contact me freely.
Product picture
Audited Supplier 
){kind=link}