High Efficiency Power Generation Set 30kw 50kw 100kw 200kw 300kw 400kw 500kw Biomass Gas Generator

• Customization: Available
• After-sales Service: One Year
• Warranty: One Year
• Model NO.: LH300GFJ
• Certification: CCC, ISO, TLC, CE
• Output Type: AC Three Phase
• Standard: Standard
• Model Number (Engine Type): Lhng20
• Brand Name: Lvhuan
• Prime Power/Standby Power: 16kw/20kw
• Rated Speed: 1500/1800rpm
• Rated Frequency: 50/60Hz
• Rated Voltage: 400V/230V
• Phase: AC 3-Phase, 4 Wire
• Voltage Stability: ≤±2%
• Voltage Transient: ≤±10%
• Voltage Stable Time: ≤1s
• Transport Package: in Wooden Package
• Specification: CE ISO
• Trademark: Lvhuan
• Origin: Zhangqiu, Shandong
• HS Code: 8502200090
• Production Capacity: 60pieces/Month

Product Description

1.Product description:
Biomass power generation is the use of biomass power generation of biomass energy, is one of the renewable energy generation, including direct combustion power generation, agriculture, forestry and agriculture and forestry waste waste gasification power generation, waste incineration power generation, landfill gas power generation, and biogas power generation.

2.Gas requirements for generator:
1m from genset's pressure regulating valve of inlet
a. Temperature of biomass≤ 40º C;
b. Pressure of biomass 5~20kPa, velocity of pressure≤ 1kPa/min;
c. H2S≤ 200mg/Nm3;
d. NH3≤ 20mg/Nm3;
e. Coke tar content≤ 20mg/Nm3;
f. Impurities particle size≤ 5μ M; Impurity content≤ 30mg/Nm3;
g. Moisture Content of biomass ≤ 40g/Nm3;
h. Biomass calorific value≥ 4.2MJ/Nm3.
Purification of biomass has a significant impact on machine life and continuous running time!
 
3.Specifications:
a. Power range: 10kw-1000kw, single or parallel running
b. Stable engine, famous alternator, PLC control panel
c. Multi-option of engine, alternator and control system and cooling system
d. Long continuous running hours, 8000 hours per year
e. With CE and ISO
f. Manufacturer, OEM provided
 
4.Main spare parts:
a. Control system: America Woodward control system
b. Controller: ComAp, Deepsea, Woodward
c. Ignition system: American ALTRONIC, including:magneto, high-tension coil
d. Starting system: DC 24V electric motor. 
e. Mixer: IMPCO
6. Spark plug: STIT
 
5.Worksite requirements for generator:
The worksite needs to meet following basic requirements:
 a)  Ambient temperature between -40ºC~40ºC;
 b)  Relative humidity less than 95%(35ºC);
 c)  Site elevation not higher than 2500m;
 d)  For outdoor installation, simple rain shelter is required

 6.Parameter of Natural Gas Generator Set

Parameter of Natural Gas Generator Set
Model Number (Engine Type)	LHBMG500
Brand Name	LVHUAN
Prime Power/Standby Power	400KW/500KW
Rated Speed	1000/1200RPM
Rated Frequency	50/60Hz
Rated Voltage	400V/230V
Phase	AC 3-Phase, 4 wire
Voltage Stability	≤±2%
Voltage transient	≤±10%
Voltage Stable time	≤1s
Heat consumption	≤11mj/kw.h
Lubricant Consumption	≤1.0g/kw.h
Engine Capacity	71.4L
Cylinder Number	12-V
Cylinder Bore	190mm
Stroke	210mm
Starting System	DC 24V electric motor
Cooling method	water cooler
Lubricant method	Passive and flying lubricant
Isolation class	H
Protection	IP23
Alternator	Siemens
Power Factor	0.8 lagging
Exciting method	brushless
Colour	your choice
Certificates	ISO 9001:2008, CE
Warranty	1 year or 1000 running hours which arrives first
Type	Open
Control system	Automatic alarm system
Size	6200x2100x2800mm
Weight	12500kg

 
7.Main composition of biomass gas
After being gasified, the basis of gas is CO(20%),      H2(9%),CH4(12%), CO2(12%), O2 (1%), N2(52%). The lower heating value is 5-6MJ/NM^3. Efficiency of gasification: 1kg dried material can generate 2Nm^3 GAS, conversation rate is more than 85%. 1kg dry material can generate 1kw.h power
6.Natural gas generator Service: 

a. Pre-sale service: 

We will send our engineer to prospect the site of power station free to charge. According to the situation of site we can supply you many drawings which can meet the requirement of design and construction, like power station floor plan, engineering flow sheet of circle cooling system, genset installation, genset foundation, electrical connection and some other techincal support etc. 

b. Sale service: 

We will send our engineer to the site to guide you the installation of generator set, subsystem and relative equipment. We will debug the generator set till it can generate power successfully. We will also supply a technical training to the operators. You also can send your staff to our company. We can train you till you can operate the generator set and during this time we can offer you board and lodging free of Charge. 

c. After-sale service: 

(1)in our company, different people is in charge of different area, we will response periodically and support you technical service free of charge, include equipment debugging, fault eliminating, technical advice, maintenance assistant, etc. 
(2)For the quality problem, we will service for you free of charge during the guarantee period. 
(3)One year guarantee period and lifetime service. 
(4)Insisting on principle of "solving problems first, trying to recover the generator set as soon as possible and then analysis the reason", we solve quality problem in time when genset doesn't work, We insure to help our clients to gain the biggest economic profit. 

8.FAQ
1. How to choose the right model? 
 A: It depends on continuous output power, Voltage, Frequency and fuel type.  Please tell me what fuel (natural gas, biogas, biomass gas,wood syngas, methane,coal gas) or raw material(like wood, grass, nutshell and so on) The right model of generator will be recommend soon.
Me and our engineers are always available at your service.
 
 2. What is the oil consumption and capacity per hour? 
 A: 1.0-1.63g of lubricant oil consumption per hour. 
1.0 Cubic meter gas can produce 1.5- 3.0kw/h power. The capacity depends on gas energy(Kcal). E.g 1.0 Cubic meter natural gas produce about 3.0-4.0kw/h  
 
3. What is the overhaul? 
 A: About 30000 working hours. A week is enough to finish.  We offer manual for weekly, monthly and overhaul maintenance.
 
4. What is the warranty? 
 A: 1 year. Inside this 1 year, we offer all spare parts free of charge. After this period, spare      parts are not free. What's more, a set of spare parts will be shipped together with generator set free of charge.  
 
5. How is the after sale service and maintenance? 
A: We offer installation,repair and maintain service abroad. And online guide service if needed anytime. Our before-sale, in-sale and after-sale service are all trustable, you can name it.
 
6. What products we offer?
Biomass gasifier,Biomass/syngas generator,biogas generator,Natural gas(CNG,LNG) / methane generator,Coal gas generator,Diesel generator.\
Generators can parallel together to form large power, E.g. 5 sets 400kw biomass generator form 2000kw biomass generator system.