Customization: | Available |
---|---|
Gas Source: | Natural Gas |
Certification: | CE, CCC |
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
2. Requirements of Natural Gas genset :
Within 1m from pressure regulating valve of gas intake
(1). The ration of CH4 in natural gas ≥70% .
(2). Pressure of natural gas : 80-200kpa, pressure changing rate ≤ 1kpa/min
(3). H2S ≤ 20mg/Nm3
(4). Moisture content ≤ 40g/Nm3
(5). Impurity particle size ≤ 5μm, impurity content ≤ 30mg/Nm3
3. More Pictures :
Natural gas generator list |
||||
Genset Mode | Prime power | Continuous power | Engine Mode | Displacement |
LHNG10 | 10kw | 8kw | LH2100 | 1.80L |
LHNG20 | 20kw | 16kw | LH4100 | 3.61L |
LHNG30 | 30kw | 24KW | LH4105 | 4.32L |
LHNG40 | 40KW | 32KW | LH6105 | 6.45L |
LHNG50 | 50KW | 40KW | LH4135 | 8.58L |
LHNG60 | 60KW | 48KW | LH4135 | 8.58L |
LHNG70 | 70KW | 56KW | LH6135 | 12.8L |
LHNG80 | 80KW | 64KW | LH6135 | 12.8L |
LHNG90 | 90KW | 72KW | LH6135 | 12.8L |
LHNG100 | 100KW | 80KW | LH6135 | 12.8L |
LHNG120 | 120KW | 96KW | LH12V135 | 25.75L |
LHNG140 | 140KW | 115KW | LH12V135 | 25.76L |
LHNG150 | 150KW | 120KW | LH12V135 | 25.75L |
LHNG180 | 180KW | 144KW | LH12V135 | 25.75L |
LHNG200 | 200KW | 160KW | LH12V135 | 25.75L |
LHNG250 | 250KW | 200KW | LH12V190 | 35.75L |
LHNG300 | 300KW | 240KW | LH12V190 | 35.75L |
LHNG350 | 350KW | 280KW | LH12V190 | 35.75L |
LHNG400 | 400KW | 320KW | LH12V190 | 71.45L |
LHNG500 | 500KW | 400KW | LH12V190 | 71.45L |
LHNG600 | 600KW | 480KW | LH12V190 | 71.45L |
Parameter of natural gas generator | ||||
Rate Voltage | 400V/230V | |||
Phase | 3Phase 4 wires | |||
Rate Frequency | 50HZ/60HZ | |||
Power Factor | 0.8 | |||
Voltage Regulating Range | 95%-105% | |||
Voltage Steady State | ≤±2% | |||
Voltage Transient State | ≤±10% | |||
Voltage Settling | ≤1S | |||
Voltage Volatility | ≤±0.5% | |||
Frequency Steady State Regulation Rate | ≤0.5% | |||
Frequency Transient State Regulation Rate | ≤±10% | |||
Heat Consumption | 9.8mj/kw.h | |||
Pressure | 5-20kpa | |||
Intake Mode | Natural intake | |||
Sparking Mode | Sparking plug | |||
Voltage Regulation Mode | automatic | |||
Speed Regulation Mode | Electronic speed regulation | |||
Lubricating Mode | Pressure and splash | |||
Cooling Mode | Closed/open circulating water cooling | |||
Starting Mode | 24V electric motor | |||
Overhaul Time | ≥20000h | |||
Noise | ≤105aB(A) | |||
Exhaust Temperature | ≤650°C |
1. Generator set would be covered with plastic film cover ;
2. Control panel, batteries, electric cables are packed with plywood boxes;
3. Exhaust pipes, engine mufflers are put in the container without packing.
7. FAQ :
1. How to choose the right model ?
A : It depends on continuous output power, Voltage, Frequency and fuel type.
B : Our sales and engineers are always available at your service.
2. What is the oil consumption and capacity per hour ?
A : 1.0-1.63g of lubricant oil consumption per hour.
1.0 Cubic meter gas can produce 1.5 - 3.0 kw/h power. The capacity depends on gas energy(Kcal). E.g 1.0 Cubic meter natural gas produce about 3.0-4.0kw/h.
3. What is the overhaul ?
A : About 30000 working hours. One week is enough to finish.
4. What is the warranty ?
A : One year.
we offer all spare parts free of charge during warranty period. After this period, spare parts are not free. What's more, a set of spare parts will be shipped together with generator set free of charge .
5. How is the after sale service and maintenance?
A:We offer installation,repair and maintain service abroad. And online guide service if needed anytime. Our before-sale, in-sale and after-sale service are all trustable, you can name it.
6. What products we offer ?
Biomass gasifier,Biomass/syngas generator,biogas generator,Natural gas(CNG,LNG) / methane generator,Coal gas generator,Diesel generator.
7. How to make the order ?
Just send inquiry/message to our sales' Email / TradeManager , they will reply and offer the details ASAP according to your needs .
Contact : Kiki Li
Mobile : +86 1341 8577 246
1. Pre-sale service:
A. Our engineers are available for onsite prospect before installation free to charge.
B. Foundation drawing and detailed Dimension free form us.
2. In-sale service:
A. Onsite overall guide installation,operation and maintenance training .
B. Assistance and instruction of trial running.
3. After-sale service:
A.Our engineers are in charge of different area,we will response periodically and support you
technical service free of charge,
B.Free of charge for the quality problem during the guarantee period.
C.One year guarantee period and lifetime service.
4. Spare parts service:
A.All spares parts on our gensets supplied by us.
B. Free spare parts together with genset when shipping.