Export to Indonesia 500kw-5MW Coal Powe Plant Type Coal Gas Generator

Product Details
Customization: Available
Gas Source: Coal Gas
Certification: CE, ISO
Diamond Member Since 2014

Suppliers with verified business licenses

Audited Supplier

Audited by an independent third-party inspection agency

Number of Employees
81
Year of Establishment
2008-10-13
  • Export to Indonesia 500kw-5MW Coal Powe Plant Type Coal Gas Generator
  • Export to Indonesia 500kw-5MW Coal Powe Plant Type Coal Gas Generator
  • Export to Indonesia 500kw-5MW Coal Powe Plant Type Coal Gas Generator
  • Export to Indonesia 500kw-5MW Coal Powe Plant Type Coal Gas Generator
  • Export to Indonesia 500kw-5MW Coal Powe Plant Type Coal Gas Generator
  • Export to Indonesia 500kw-5MW Coal Powe Plant Type Coal Gas Generator
Find Similar Products
  • Overview
  • Product Parameters
  • Service committee:
  • FAQ
Overview

Basic Info.

Model NO.
LHCG500
Standard
Standard
Alternator
Siemens: Brushless, Self-Excited, with AVR, Insula
Controller
Comap, Deepsea
Ignition System
Altronic
Lube Oil
Total Gas Engine Oil 15W-40
Intake Mode
Turbocharger
Cooling Mode
Closed or Open Type Water Cooling
Lubrication Mode
Pressure and Splash
Color
Yellow or Custom Colors
Transport Package
Membrane or Wooden Box
Specification
CE and ISO
Trademark
LVHUAN
Origin
Jinan, Shandong
HS Code
8502200000
Production Capacity
1000 Sets Per Year

Product Description

Export to Indonesia 500kw-5MW Coal Powe Plant Type Coal Gas Generator

Product Description:
We are professional manufacturer of gas and diesel generator set for alomost 20 years, our products mainly include natural gas generator, biogas generator, biomass generator, coal gas generator, syngas generator, coal-bed gas generator, coke oven gas generator, diesel generator etc.
 
Product Parameters
 
Parameter of Biogas Generator Set
Model Number (Engine Type) LHCG500
Brand Name LVHUAN
Prime power/Standby power 400KW/500KW
Rated Speed 1000/1200RPM
Rated Frequency 50/60Hz 
Rated Voltage 400V/230V 
Phase AC 3-Phase, 4 wire
Voltage Stability ≤±2%
Voltage transient ≤±10%
Voltage Stable time ≤1s
Heat consumption ≤9.8mj/kw.h
Lubricant consumption ≤1.0g/kw.h
Engine Capacity 71.45L
Cylinder Number 12
Cylinder Bore 190mm
Stroke 210mm
Starting System DC 24V electric motor
Cooling method water cooler
Lubricant method Passive and flying lubricant
Isolation class H
Protection IP23
Alternator Siemens
Power Factor 0.8 lagging 
Exciting method brushless 
Colour your choice 
Certificates ISO 9001:2008, CE
Warranty 1 year or 1000 running hours which arrives first
Type Open 
Control system Automatic alarm system 
Size 6200*2300*2700
Weight 125000kg

Specifications:
1. Power range: 10kw-1000kw, single or parallel running
2. Stable engine, famous alternator, PLC control panel
3. Multi-option of engine, alternator and control system and cooling system
4. Long continuous running hours, 8000 hours per year
5. With CE and ISO
6. Manufacturer, OEM provided

Main spare parts:
1. Control system: America Woodward control system
2. Controller: ComAp, Deepsea, Woodward
3. Ignition system: American ALTRONIC, including:magneto, high-tension coil
4. Starting system: DC 24V electric motor. 
5. Mixer: IMPCO
6. Spark plug: STITT

Worksite requirements for generator:
The worksite needs to meet following basic requirements:
 a)  Ambient temperature between -40ºC~40ºC;
 b)  Relative humidity less than 95%(35ºC);
 c)  Site elevation not higher than 2500m;
 d)  For outdoor installation, simple rain shelter is required.

Gas requirements for generator:
Gas requirements:
The coal gas must be purified before burning in engine:
1. Gas temperature≤ Local temperature + 15º C(≤ 40º C is better)
2. Gas Pressure can be adjusted from 5-20 kPa, the changing pressure rate ≤ 1kPa/min.
3. Use low-sulfur coal, one set sulfur scrubber is necessary (H2S≤ 200mg/Nm3)
4. NH3≤ 20mg/Nm3
5. Tar and Particulate matter≤ 50mg/Nm3.
6. Diameter of Particulate matter≤ 5μ M, particulate content≤ 30mg/Nm3.
7. Moisture content≤ 40g/Nm3
10. Heat Value of coal gas: ≥ 4.2Mj/ Nm3

Export to Indonesia 500kw-5MW Coal Powe Plant Type Coal Gas GeneratorExport to Indonesia 500kw-5MW Coal Powe Plant Type Coal Gas GeneratorExport to Indonesia 500kw-5MW Coal Powe Plant Type Coal Gas GeneratorExport to Indonesia 500kw-5MW Coal Powe Plant Type Coal Gas Generator
 
Service committee:

1. Pre-sale service: 

1) We will send our engineer to prospect the site of power station free of charge.
2) According to the situation of site, we will provide design drawings, such as power plant floor drawing, cooling system drawing, genset foundation, control room design, etc.
 
2. Sale service:
1) Operator training would be conducted by Lvhuan technicians during the process of commissioning or Factory training course in China,
2) Installation and commission of the genset would be instructed assisted by Lvhuan technicians at site.
 
3. After-sale service:
1) We have strong after-sale team, we will response within 24 hours and provide technical supports by phone or site guiding, help our clients to gain the biggeset profit.
2) For the quality problem, we will service for you free of charge during the guarantee period.
3) We  provide one year guarantee period and lifetime service.

Plentiful spare part supply:
1. We have spart parts department, plentiful spare part supply for all genset model will guarantee genset lifetime running.
2.All parts were from original factories or professional factories,complete in specification, keep good quality.

 
FAQ

1. How to choose the right model?

To choose a right model, we need to know required continuous output power, local voltage and frequency and fuel (such as diesel, natural gas, biogas, biomass gas, coal gas, syngas, etc.). For biomass power plant and coal gas power plant, some clients may doesn't have gasification system, then we need information about raw material.
 
2. What's the warranty?
The warranty is one year. We will offer free service and spare parts during warranty period. Lifetime service will be provided by our trustworthy after-sale team.
 
3. How to do the maintenance?
Operator training will be provided by our technician. After training, local operator can do the basic maintenance by themselves according to our maintenance manual.
 
4. Will be operation training offered?
Yes, operator training would be conducted by our technicians during the process of commissioning or factory training course in China.
 
5. What's about the installation and commissioning?
Installation and commissioning of the genset would be instructed assisted by our technicians on site.
 
PLS FEEL FREE TO ASK FOR QUESTIONS AND QUOTATION!

Send your message to this supplier

*From:
*To:
*Message:

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now
Contact Supplier