200kw Natural Gas Generator Set

• Customization: Available
• After-sales Service: One Year
• Warranty: One Year
• Model NO.: LHNG200
• Output Type: AC Three Phase
• Gas Source: Natural Gas
• Certification: CE, TLC, ISO, CCC
• Power: 200kw
• Standard: Standard
• Model Number (Engine Type): Lhng200
• Brand Name: Lvhuan
• Prime Power/Standby Power: 200/250kw
• Rated Speed: 1500rpm
• Rated Frequency: 50Hz
• Rated Voltage: 400/230V
• Phase: 3-Phase, 4 Wire
• Heat Consumption: 9.8mj/Kw.H
• Cylinder Number: 12
• Cylinder Bore: 135mm
• Transport Package: with Standard Export Wooden Case
• Specification: CE, ISO9001: 2008
• Trademark: lvhuan
• Origin: Shandong, China
• HS Code: 8502200090
• Production Capacity: 1000sets/Year

Product Description

Company Introduction
Shandong lvhuan power equipment Co., Ltd is a comprehensive high-tech company which is engaged in the researching, manufacturing and after-sale service of the new energy-saving generator products.
 
 Our main products are gas generator set, diesel engine and diesel generator set. It forms a series of products, including: Biogas gen-set, Coal mine gen-set, Natural gas gen-set, Biomass gen-set, Coke oven gas gen-set, Gas gen-set, Diesel gen-set and the entire building machine. These products cover almost all the range of power, and their power performance, economical efficiency and reliability are all in the advanced level of this field. 
 
We have attained ISO9001, ISO14001 and CE certifications, and carries them out in every production procedure. With the strong capacity of researching and designing, we can not only provide you with quality products , but also your good partnership in the general Power Generation Program, including: consulting service, project designing, construction, installation ,adjustments and facilities maintenance

Parameter of Natural Gas Generator Set
Model Number (Engine Type)	LHNG200
Brand Name	LVHUAN
Prime Power/Standby Power	160KW/200KW
Rated Speed	1500/1800RPM
Rated Frequency	50/60Hz
Rated Voltage	400V/230V
Phase	AC 3-Phase, 4 wire
Voltage Stability	≤±2%
Voltage transient	≤±10%
Voltage Stable time	≤1s
Heat consumption	≤11mj/kw.h
Lubricant consumption	≤1.0g/kw.h
Engine Capacity	26.9L
Cylinder Number	12
Cylinder Bore	138mm
Stroke	150mm
Starting System	DC 24V electric motor
Cooling method	water cooler
Lubricant method	Passive and flying lubricant
Isolation class	H
Protection	IP23
Power Factor	0.8 lagging
Exciting method	brushless
Colour	your choice
Certificates	ISO 9001:2008, CE
Warranty	1 year or 1000 running hours which arrives first
Type	Open
Control system	Automatic alarm system
Size	3250x1450x2140mm
Weight	3200kg

Worksite requirements:
Worksite needs to meet following basic requirements: 
Ambient temperature between -40 to 40°C
Relative humidity less than 95% (35°C)
Site elevation not higher than 2500m
For outdoor installation, simple rain shelter is required
Fuel gas requirement:
Genset will be able to output at its full power with fuel gas with the specification as below:
Natural Gas must be purified before burning in engine
Suitable Natural Gas conditions for genset
1m distance away from genset's pressure regulating valve of inlet
Temperature ofNatural Gas: ≤40°C
Pressure of Natural Gas 5-20kPa, velocity of pressure ≤1kPa/minute
CH4 content of Natural Gas: ≥40%, variation rate: ≤2%/minute
H2S: ≤200mg/Nm3
NH3: ≤20mg/Nm3
Impurities particle size: ≤5μm, impurity content: ≤30mg/Nm3
Moisture content of Natural Gas: ≤40g/Nm3
Note: excessive sulfur contents can do serious damage to engine elements
Purification of Natural Gas has a significant impact on machine life and continuous running time
Packing and shipping:
Genset would be covered with plywood case or plastic film cover
Control panel, batteries, electric cables are packed with plywood boxes or cartons
Exhaust pipes, engine mufflers are put in the container without packing
Services
1.Pre-sale service:
 
(1)We will send our engineer to prospect the site of power station free to charge.
 (2)According to the situation of site we can supply you many drawings:like power station floor plan,engineering flow sheet of circle cooling system,genset installation,genset foundation,electrical connection and some other techincal support etc.
 
2.Sale service:
 (1)we will send our engineer to the site to guide you the installation of generator set, subsystem and relative equipment.
 (2)We will debug the generator set till it can generate power successfully.
 (3)We will also supply a technical training to the operators.Orcan send your staff to our company.We can train you till you can operate the generator set.
 
3.After-sale service:
 (1)Our every engineers are in charge of different area,we will response periodically and support you technical service free of charge
 (2)For the quality problem, we will service for you free of charge during the guarantee period.
 
(3)One year guarantee period and lifetime service.
 (4)we solve quality problem in time when genset doesn't work,We insure to help our clients to gain the biggest economic profit.

FAQ
Q1:Are you trading company or factory?
A:Manufacture with factory.

Q2:What's your warranty period?
A:Our warranty is 1 year or 1500 running hours whichever come first.Based on special requirement,the warranty could be extended.

Q3:What is power range of our gas generate set?
A:Range from 30KW-1500KW.

Q4:What is the MOQ?
A:1 set.

Q5:What's the delivery time?
A:To be negotiable.

Q6:Do you accept OEM/ODM service?
A:Yes,we could produce it according to your requirement.

Q7:What is the Payment term?
A:30% TT in advance,and balance before delivery.