Biomass fuel power wood burning generator :
Worksite requirements for wood burning electricity generator
The worksite needs to meet following basic requirements:
A) Ambient temperature between -40º C~45º C;
B) Relative humidity less than 90%(35º C);
C) Site elevation not higher than 2000m;
D) For outdoor installation, simple rain shelter is required.
Fuel gas requirement for wood burning electricity generator
The genset will be able to output at its full power with fuel gas with the specification as below:
1m distance away from genset's pressure regulating valve of inlet
Temperature of natural gas ≤ 40º C;
Pressure of natural gas 3~10kPa, velocity of pressure≤ 1kPa/min;
H2S≤ 200mg/Nm3;
NH3≤ 20mg/Nm3
Tar Content ≤ 20%mg/Nm3
Impurities particle size≤ 5μ M; Impurity content≤ 30mg/Nm3;
Moisture Content of biomass ≤ 40g/Nm3; Heat value more than 4.2MJ/Nm3
If fuel gas contains higher quantity of sulfur and ammonia, it not only corrodes the pole of spark plug seriously, but also increases the acid value, which corrodes internal parts of genset and corrodes the genset with precipitates.
Why you chioce Shandong Lvhuan Power equipment Co., Ltd. Wood burning electricity generator?
1. We are professional manufacturer for gas/diesel generator set, over 15 years produced experience;
2. Products range of gas engines/genset, including diesel engines, biomass generator sets, natural gas generator sets, biogas generator sets, coal mine gas generator set, etc. Products arrange from 5kw-3000kw;
3. Our workshop covering more than 40000 square meters, techincal engineer and after-service more than 100 people. Also products achieved CE, ISO9001: 2008, ISO2001: 1400 etc. Certificats. And passed many patents.
4. Our products are well received by our customers in Spain, Italy, Canada, Venezuela, Austraila, Thailand, Malaysia, Philippine, Indonesia, and with some Africa countries etc.
5. We have many cooperation companies: Like dehydration equipment, desulfurization equipment, gasified equipment, recovery system exhaust heat, CCHP system etc. So can offer you complete project proposal if you like.
Wood burning electricity generator Service:
1. Pre-sale service:
We will send our engineer to prospect the site of power station free to charge. According to the situation of site we can supply you many drawings which can meet the requirement of design and construction, like power station floor plan, engineering flow sheet of circle cooling system, genset installation, genset foundation, electrical connection and some other techincal support etc.
2. Sale service:
We will send our engineer to the site to guide you the installation of generator set, subsystem and relative equipment. We will debug the generator set till it can generate power successfully. We will also supply a technical training to the operators. You also can send your staff to our company. We can train you till you can operate the generator set and during this time we can offer you board and lodging free of Charge.
3. After-sale service:
(1)in our company, different people is in charge of different area, we will response periodically and support you technical service free of charge, include equipment debugging, fault eliminating, technical advice, maintenance assistant, etc.
(2)For the quality problem, we will service for you free of charge during the guarantee period.
(3)One year guarantee period and lifetime service.
(4)Insisting on principle of "solving problems first, trying to recover the generator set as soon as possible and then analysis the reason", we solve quality problem in time when genset doesn't work, We insure to help our clients to gain the biggest economic profit.
| Model Number (Engine Type) |
LHBMG20-600 |
| Brand Name |
LVHUAN |
| power |
20kw-600kw |
| Rated Speed |
1500/1800RPM |
| Rated Frequency |
50/60Hz |
| Rated Voltage |
400V/230V |
| Phase |
AC 3-Phase, 4 wire |
| Voltage Stability |
≤±2% |
| Voltage transient |
≤±10% |
| Voltage Stable time |
≤1 |
| Heat consumption |
≤9.8mj/kw.h |
| Lubricant consumption |
≤1.63g/kw.h |
| Engine Capacity |
4.33 L |
| Cylinder Number |
4 |
| Cylinder Bore |
105mm |
| Stroke |
125mm |
| Starting System |
DC 24V electic motor |
| Cooling method |
water cooler |
| Lubricant method |
Passive and flying lubricant |
| Isolation class |
H |
| Protection |
IP23 |
| Alternator |
ENGGA |
| Power Factor |
0.8 lagging |
| Exciting method |
brushless |
| Colour |
your choice |
| Certificates |
ISO 9001:2008, CE |
| Warranty |
1 year or 1500 running hours |
| Type |
Open |
| Control system |
Automatic alarm system |
| Size |
2100x900x1200mm |
| Weight |
950kg |
Audited Supplier 
){kind=link}