| Customization: | Available |
|---|---|
| After-sales Service: | One Year |
| Warranty: | 1 Year or 1000 Hours |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
The worksite needs to meet following basic requirements:
a) Ambient temperature between -40ºC~45ºC;
b) Relative humidity less than 90%(35ºC);
c) Site elevation not higher than 2000m;
d) For outdoor installation, simple rain shelter is required.
The engine is high,/low temperature cycle requires the use of softened water.Cooling water should be used in slightly alkaline cleaning water, not compounds containing corrosive, such as chlorides, sulphates or acid etc..Its main index requirements are as follows:
hardness:0.7~5.3me/L ;chloride ion content:<150mg/L;PH≤7~8.5
The genset will be able to output at its full power with fuel gas with the specification as below:
1m distance away from genset's pressure regulating valve of inlet:
1)Temperature of biomass gas ≤40ºC;
2)Pressure of biomass gas 3~10kPa, velocity of pressure≤ 1kPa/min;
3)H2S≤200mg/Nm3;
4)NH3≤20mg/Nm3
5)Tar Content ≤20%mg/Nm3
6) Impurities particle size≤5μm; impurity content≤30mg/Nm3;
7)Moisture Content of biomass ≤40g/Nm3;Heat value more than 4.2MJ/Nm3;
If fuel gas contains higher quantity of sulfur and ammonia,it not only corrodes the pole of spark plug seriously,but also increases the acid value,which corrodes internal parts of genset and corrodes the genset with precipitates.
Model of generating sets |
LHBMG300 |
Model of engine |
LH6190 |
Alternator |
Liuzhou Siemens |
Standby power |
300KW |
Rated power KW |
240KW |
Rated speed r/min. |
1500/1800 |
Rated voltage V |
400/230V |
Rated frequency Hz |
50/60 |
Rated power factor |
0.8 |
Supply method |
3 phases 4 lines |
Excitation method |
brushless |
Starting method |
24V DC starter |
Fuel gas consumption MJ/Kw.h |
9.8 |
Lubricant consumption G/Kw.h |
≤1.0 |
Cooling method |
Open/Closed cooling water |
Speed modulate method |
Electronic control |
Net weight kg |
1580 |
| Overall dimension L×B×H(mm) | 620×210×280mm |
1) Over 20 years gas/diesel generator produced experience;
2) Main products include: diesel engines, biomass generator, natural gas generator , biogas generator,
coal gas generator set, etc. Products arrange from 5kw-3000kw ;
3) Our workshop covering more than 40000 square meters, techincal engineer and after-service more than 100 person.
4) CE,ISO9001:2008,ISO2001:1400 ,SGSetc.certificats approve and passed many patents.
5) Exported many countries such as: Spain, Italy, Canada, Venezuela, Austraila, Thailand, Malaysia,
Philippine,Indonesia,and with some Africa countries etc.
6) We provide TURN-KEY project : like water removal system,H2S removal system,gasified equipment,
recovery system of exhaust heat,CCHP system etc.
7) Machine have long serive-life: more than 20 years.
){kind=link}