CE ISO Approved 400kw Natural Gas Generator Set Supplier

Product Details
Customization: Available
After-sales Service: One Year
Warranty: 1 Year or 1000 Running Hours Which Arrives First

360° Virtual Tour

Diamond Member Since 2014

Suppliers with verified business licenses

Audited Supplier

Audited by an independent third-party inspection agency

Number of Employees
81
Year of Establishment
2008-10-13
  • CE ISO Approved 400kw Natural Gas Generator Set Supplier
  • CE ISO Approved 400kw Natural Gas Generator Set Supplier
  • CE ISO Approved 400kw Natural Gas Generator Set Supplier
  • CE ISO Approved 400kw Natural Gas Generator Set Supplier
  • CE ISO Approved 400kw Natural Gas Generator Set Supplier
  • CE ISO Approved 400kw Natural Gas Generator Set Supplier
Find Similar Products

Basic Info.

Model NO.
LHNG400
Gas Source
Natural Gas
Certification
CE, ISO
Power
400kw
Standard
Standard
Rated Voltage
400V/230V
Rated Frequency
50/60Hz
Prime Power/Standby Power
400kw
Rated Speed
1000rpm
Cylinder Number
12V
Cylinder Bore
190mm
Stroke
210mm
Transport Package
Normal Exporting Package
Specification
CE ISO
Trademark
LVHUAN
Origin
China
HS Code
8502200090
Production Capacity
500sets/Year

Product Description

1.Gas Component
Natural Gas---its main component is CH4,which takes 90% of the whole content.Thermal efficiency of conversion is 65%, which is same to the LPG and higher than Coal; Calculated on the same calorific value, the price of natural gas is lower than the price of coal and petroleum. Natural gas is used by civil use, generation, industrial chemicals and industrial fuel etc. it's a good substitute of coal and petroleum. It can take instead of civil coal gas; it can be used as nitrogenous fertilizer instead of coal and petroleum; it can be used as ethylene instead of naphtha; it can be used as the car engine fuel instead of petroleum.
Natural Gas Generator, fueled mainly by natural gas and LPG, is widely used in regions or areas with abundant oil field and natural gas. Global electrical power demand will be 80% higher by 2040, with gas becoming a key energy source for EP generation. The unit starts quickly, be operated easily, with complete set of safety system, and can be as power device and electricity device for oil field and local companies.
2. Requirements For Natural Gas
Within 1m from pressure regulating valve of gas intake;
The ratio of CH4 in natural gas≥70%;
Pressure of natural gas: 80-200kpa, rate of pressure change≤1kpa/min;
H2S≤20mg/Nm3
Moisture content≤40g/ Nm3
Impurity particle size≤5µm, impurity content≤30mg/ Nm3
If fuel gas contains higher quantity of sulfur and ammonia, it not only corrodes the pole of spark plug seriously, but also increases the acid value, which corrodes internal parts of genset and corrodes the genset with precipitates.
3.Application Place
Oil field: industrial zone and petroleum chemical plant;
Used as standby power source instead of natural gas generating;
Supply power for the auxiliary engine which work in oil well
4.Technical Parameters of Natural Gas Generator Set
Model Number LHNG400
Brand Name LVHUAN
Rated Power 400 kw
Cylinder Number 12-v
Cylinder Diameter 190mm
Range 210mm
Rated Speed 1000r/min
Rated Frequency 50 Hz
Rated Voltage 400/230V
Phase AC 3 phase 4 wire
Starting system 24V DC electric motor
Cooling method water cooler
Lubricant method pressure and splash
Isolation class H
Protection IP23
Power Factor 0.8 lagging
Exciting method Brush less
Voltage Stability ≤±2%
Voltage Transient ≤±10%
Voltage Stable time ≤1 s
Heat consumption ≤9.8mj/kw.h
Oil consumption  ≤1.63g/kw.h
 The generator sets pictures:
CE ISO Approved 400kw Natural Gas Generator Set SupplierCE ISO Approved 400kw Natural Gas Generator Set SupplierCE ISO Approved 400kw Natural Gas Generator Set SupplierCE ISO Approved 400kw Natural Gas Generator Set SupplierCE ISO Approved 400kw Natural Gas Generator Set Supplier
5. Service Committee
1. Pre-sale service: 
 1) We will send our engineer to prospect the site of power station free of charge.
 2) According to the situation of site, we will provide design drawings, such as power plant floor drawing, cooling system drawing, genset foundation, control room design, etc. 
 2. Sale service:
1) Operator training would be conducted by our technicians during the process of commissioning or Factory training course in China,
2) Installation and commission of the genset would be instructed assisted by our technicians at site.
 3. After-sale service:
1) We have strong after-sale team, we will response within 24 hours and provide technical supports by phone or site guiding, help our clients to gain the biggeset profit.
2) For the quality problem, we will service for you free of charge during the guarantee period.
3) We  provide one year guarantee period and lifetime service.
4)we solve quality problem in time when genset doesn't work,We insure to help our clients to gain the biggest economic profit.





 

Send your message to this supplier

*From:
*To:
*Message:

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now
Contact Supplier