CE/ISO Low Speed 500/600 Rpm High Hydrogen Gas 300kw - 2MW Syngas Generator

• Customization: Available
• After-sales Service: One Year
• Warranty: One Year
• Model NO.: LHBMG300
• Gas Source: Syngas
• Certification: CE, ISO
• Power: ＞200kW
• Standard: Standard
• Model: Syngas Generator
• Rate Power: 20-500
• Power Factor: 0.8
• Applicable Air: Syngas
• Free Traning in Our Factory: Yes
• Technology Support: Lifetime
• Controller: Comap/Deep Sea
• Engineer Overseas Available: Available
• Output Voltage: 400/230V
• Output Frequency: 50/60Hz
• Transport Package: Standard Package
• Specification: Composition: CO, CH4
• Trademark: LVHUAN
• Origin: Shandong, China
• HS Code: 8502200000
• Production Capacity: 30sets/Year

Product Description

Low speed 500/600 rpm high hydrogen gas 300kw - 2mw syngas generator

1. Low speed 500/600 rpm high hydrogen gas 300kw - 2mw syngas generator core features:
1) Low cost in maintenance
2) Large cylinder , Long Stroke, Low Speed, which means big reserve power capacity and constant power output
3) Low Engine Speed at 500 or 600RPM
4) Naturally Aspirated, which means low failure rate and minimaldowntime
5) Internal MixingSystem (for high hydrogengas)
6) Strong Treatment and Resistance AbilityAgainst TAR
7) Long Overhaul Time of 60000hours and lifecycle of 20-25 years
8) CE and ISO approved
 
2. Main technical parameters for Low speed 500/600 rpm high hydrogen gas 300kw - 2mw syngas generator:

Engine	Item	Technical specifications
	Model	6300D/M	8300D/M-1	8300D/M-2
	Type	In-line, four-stroke, inter-cooling, spark plug ignition, open combustion
	Cylinder number	6	8	8
	Cylinder diameter (mm)	300
	Rated speed (r/min)	500	500	600
	Rated power (KW)	400	500	550
	Heat consumption at rated power (MJ/kwh)	≤11.0
	Rotating direction (from flywheel side)	Clockwise
	Starting mode	Compressed air/motor start
	Exhaust temperature (ºC)	≤600
	Gas pressure (kPa)	≥2.5
	Gas inlet temperature (ºC)	≤40
	Oil consumption rate (g/kW.h)	≤0.8
Generator set	Model	350GFM	400GFM	500GFM
	Rated power (kw)	350	400	500
	Voltage (V)	400/6300/10500
	Current (A)	631/40/24	722/46/28	902/57/34
	Power factor (COSΦ)	(lagging)
	Excitation mode	Brushless
	Phase and connection	3 phase 4 wires/3 phase 6 wires
	Size (L*W*H) (mm)	5800*1600*2900	6400*1600*2900	6400*1600*2900
	Weight (kg)	18000	22000	22000

3. Environment requirements for low speed 500/600 rpm high hydrogen gas 300kw - 2mw syngas generator:
1) Ambient temperature between -20°C~+40°C;
2) Relative humidity less than 90%(20ºC);
3) Site elevation not higher than 2500m;
4) For outdoor installation, simple rain shelter is required. 

4. Low speed 500/600 rpm high hydrogen gas 300kw - 2mw syngas generator quality requirements:
1) Gas temperature≤40°C
2) Gas pressure 2.5~10kpa, Pressure change rate≤1kPa/min
3) Tar content≤20mg/Nm3
4) H2S content≤50mg/Nm3
5) Impurities particle size≤5μm, Impurity content≤30mg/Nm3
6) Moisture content≤20 mg/Nm3
7) Heat value≥4MJ/Nm3.

5. Low speed 500/600 rpm high hydrogen gas 300kw - 2mw syngas generator photos:

6. Spare parts of gas generator:

7. Low speed 500/600 rpm high hydrogen gas 300kw - 2mw syngas generator plant:

8. FAQ:  
1. How to choose the right model?
To choose a right model, we need to know required continuous output power, local voltage and frequency and fuel (such as diesel, natural gas, biogas, biomass gas, coal gas, syngas, etc.). For biomass power plant and coal gas power plant, some clients may doesn't have gasification system, then we need information about raw material.
2. What's the warranty of gas generator?
The warranty is one year. We will offer free service and spare parts during warranty period. Lifetime service will be provided by our trustworthy after-sale team.
3. How to do the maintenance?
Operator training will be provided by our technician. After training, local operator can do the basic maintenance by themselves according to our maintenance manual.
4. Will be operation training offered?
Yes, operator training would be conducted by our technicians during the process of commissioning or factory training course in China.
5. What's about the installation and commissioning?
Installation and commissioning of the genset would be instructed assisted by our technicians on site.
Welcome to ask for question and quoation!

Welcome to ask for question and quoation!