300kw 400kw 500kw 1MW 2MW Pyrolysis Syngas Generator

• Customization: Available
• After-sales Service: One Year
• Warranty: 12 Months
• Model NO.: LH500GFJ
• Power: 300kw-1000kw
• Certification: ISO, CE
• Output Type: AC Three Phase
• Standard: Standard
• Name: 300kw 500kw 1MW 2MW Pyrolysis Syngas Generator
• Alternator: Siemens: Brushless, with AVR, Insula
• Controller: Comap, Deepsea
• Ignition System: Altronic
• Lube Oil: Total Gas Engine Oil 15W-40
• Intake Mode: Turbocharger
• Cooling Mode: Closed or Open Type Water Cooling
• Lubrication Mode: Pressure and Splash
• Fuel: Biomass Gas, Syngas, Wood Gas, Pyrolysis Gas
• Transport Package: Membrane or Wooden Box
• Specification: CE and ISO
• Trademark: LVHUAN
• Origin: Jinan, Shandong
• HS Code: 8502200090
• Production Capacity: 1000 Sets Per Year

Product Description

300kw 400kw 500kw 1mw 2mw pyrolysis syngas generator

1. 300kw 400kw 500kw 1mw 2mw pyrolysis syngas generator core features:
1) Low cost in maintenance
2) Large cylinder , Long Stroke, Low Speed, which means big reserve power capacity and constant power output
3) Low Engine Speed at 500 or 600RPM
4) Naturally Aspirated, which means low failure rate and minimaldowntime
5) Internal MixingSystem (for high hydrogengas)
6) Strong Treatment and Resistance AbilityAgainst TAR
7) Long Overhaul Time of 60000hours and lifecycle of 20-25 years
8) CE and ISO approved
 
2. Main technical parameters for 300kw 400kw 500kw 1mw 2mw pyrolysis syngas generator:

Engine	Item	Technical specifications
	Model	6300D/M	8300D/M-1	8300D/M-2
	Type	In-line, four-stroke, inter-cooling, spark plug ignition, open combustion
	Cylinder number	6	8	8
	Cylinder diameter (mm)	300
	Rated speed (r/min)	500	500	600
	Rated power (KW)	400	500	550
	Heat consumption at rated power (MJ/kwh)	≤11.0
	Rotating direction (from flywheel side)	Clockwise
	Starting mode	Compressed air/motor start
	Exhaust temperature (ºC)	≤600
	Gas pressure (kPa)	≥2.5
	Gas inlet temperature (ºC)	≤40
	Oil consumption rate (g/kW.h)	≤0.8
Generator set	Model	350GFM	400GFM	500GFM
	Rated power (kw)	350	400	500
	Voltage (V)	400/6300/10500
	Current (A)	631/40/24	722/46/28	902/57/34
	Power factor (COSΦ)	(lagging)
	Excitation mode	Brushless
	Phase and connection	3 phase 4 wires/3 phase 6 wires
	Size (L*W*H) (mm)	5800*1600*2900	6400*1600*2900	6400*1600*2900
	Weight (kg)	18000	22000	22000

3. Environment requirements for 300kw 400kw 500kw 1mw 2mw pyrolysis syngas generator:
1) Ambient temperature between -20°C~+40°C;
2) Relative humidity less than 90%(20ºC);
3) Site elevation not higher than 2500m;
4) For outdoor installation, simple rain shelter is required. 

4. 300kw 400kw 500kw 1mw 2mw pyrolysis syngas generator quality requirements:
1) Gas temperature≤40°C
2) Gas pressure 2.5~10kpa, Pressure change rate≤1kPa/min
3) Tar content≤20mg/Nm3
4) H2S content≤50mg/Nm3
5) Impurities particle size≤5μm, Impurity content≤30mg/Nm3
6) Moisture content≤20 mg/Nm3
7) Heat value≥4MJ/Nm3.

 

Our Advantages

1.300 series gas genset's main features are wide cylinder diameter, long stroke and large displacement, to ensure its continuous and steady power output.
2.300 series adopts internal gas and air mixture system and gas & air ratio automatic control system to avoid back-fire and explosion that may caused by high content of hydrogen. No back-fire to ensure gas delivery safety.Naturally gas intake gives high safety to gas delivery. 
3.The generator requires gas pressure only over 2kpa, which let the generator applied in a wilder range and more adaptive to the tars in gas. 
4.Gas intakes naturally, then after mixed with air,entered into burner directly, without going through turbo charger,inter cooler etc, less sections, less breakdowns.
5.300 series adopts ignition system imported form USA and Germany to make sure the ignition controllable, to get high ignition power and accurate ignition time. By which, the ignition operation is more complete, more strong and with more explosive power.
6.Intake gas valve box can be demounted without moving cylinder head section. It is more convenient for maintenance and tar clearance.Low speed,long life span. 
7.It runs 8000horus/year and overhaul circle is around 60,000hours.Generator sets can parallel with other generator sets and parallel to gird manually and automatically. It can also run on iceberg model or even monitored remotely.

Supply Details:

1.Ignition system:We adopt ignition system of magneto which produced by American ALTRONIC company,including:magneto,high-tension coil,sparking plug.
2.Pressure charging system:Pulse Mixed-flow supercharger, compression ration is 1:8,meet engine's  requirement for gas-flow rate.
3.Speed regulating system: EGS gas controller of American WOODWARD Company.   
4.Low voltage cables between generator set and control room: available if needed.  

FAQ

1. How to choose the right model?
To choose a right model, we need to know required continuous output power, local voltage and frequency and fuel (such as diesel, natural gas, biogas, biomass gas, coal gas, syngas, etc.). For biomass power plant and coal gas power plant, some clients may doesn't have gasification system, then we need information about raw material.
2. What's the warranty?
The warranty is one year. We will offer free service and spare parts during warranty period. Lifetime service will be provided by our trustworthy after-sale team.
3. How to do the maintenance?
Operator training will be provided by our technician. After training, local operator can do the basic maintenance by themselves according to our maintenance manual.
4. Will be operation training offered?
Yes, operator training would be conducted by our technicians during the process of commissioning or factory training course in China.
5. What's about the installation and commissioning?
Installation and commissioning of the genset would be instructed assisted by our technicians on site.

Service committee:

1.Pre-sale service:
A.Our engineers are available for onsite prospect before installation free to charge. 
B. Foundation drawing and detailed Dimension free form us.

2.In-sale service:
A. Onsite overall guide installation,operation and maintenance training . 
B. Assistance and instruction of trial running. 

3.After-sale service:
1) Our every engineers are in charge of different area,we will response periodically and support you technical service free of charge. 
2) For the quality problem, we will service for you free of charge during the guarantee period. 
3) One year guarantee period and lifetime service. 
4) we solve quality problem in time when genset doesn't work,We insure to help our clients to gain the biggest economic profit.

Accessories:
1) Application scope of the Accessories, such as 300series,16V190,12v190, 8v190, 6190, 6135 and other engine types. 
2.)All parts were from original factories or professional factories, complete in specification, keep good quality.