600kw Natural Gas Generator for Big Power Petroleum Chemical Plant
Natural gas engine generator general description:
This type of generator is choose gas as power. Gas will be burned directly inside of engine's cylinders, then give machinery force to alternator to produce electricity power. There are mainly 3 parts on one generator set: gas engine,alternator and radiator. The generated power can be connect to national grid, or for daily use and industrial use.
Natural gas engine generator simple description:
Manufacturer supply
Capacity: 3.0-4.0kw/h per Cubic meter gas
Power supply range:10KW-1100kw
More than 1 set can be parallelled
Continuous power supply range: 8-880kw
Standard componient and assembly
Multi-option of control panel
With CE and ISO certificate
Natural gas generator specification:
Natural gas generator list |
| Genset Mode |
Prime power |
Continuous power |
Engine Mode |
Displacement |
| LHNG10 |
10kw |
8kw |
LH2100 |
1.80L |
| LHNG20 |
20kw |
16kw |
LH4100 |
3.61L |
| LHNG30 |
30kw |
24KW |
LH4105 |
4.32L |
| LHNG40 |
40KW |
32KW |
LH6105 |
6.45L |
| LHNG50 |
50KW |
40KW |
LH4135 |
8.58L |
| LHNG60 |
60KW |
48KW |
LH4135 |
8.58L |
| LHNG70 |
70KW |
56KW |
LH6135 |
12.8L |
| LHNG80 |
80KW |
64KW |
LH6135 |
12.8L |
| LHNG90 |
90KW |
72KW |
LH6135 |
12.8L |
| LHNG100 |
100KW |
80KW |
LH6135 |
12.8L |
| LHNG120 |
120KW |
96KW |
LH12V135 |
25.75L |
| LHNG140 |
140KW |
115KW |
LH12V135 |
25.76L |
| LHNG150 |
150KW |
120KW |
LH12V135 |
25.75L |
| LHNG180 |
180KW |
144KW |
LH12V135 |
25.75L |
| LHNG200 |
200KW |
160KW |
LH12V135 |
25.75L |
| LHNG250 |
250KW |
200KW |
LH12V190 |
35.75L |
| LHNG300 |
300KW |
240KW |
LH12V190 |
35.75L |
| LHNG350 |
350KW |
280KW |
LH12V190 |
35.75L |
| LHNG400 |
400KW |
320KW |
LH12V190 |
71.45L |
| LHNG500 |
500KW |
400KW |
LH12V190 |
71.45L |
| LHNG600 |
600KW |
480KW |
LH12V190 |
71.45L |
| Parameter of natural gas generator |
| Rate Voltage |
400V/230V |
| Phase |
3Phase 4 wires |
| Rate Frequency |
50HZ/60HZ |
| Power Factor |
0.8 |
| Voltage Regulating Range |
95%-105% |
| Voltage Steady State |
≤±2% |
| Voltage Transient State |
≤±10% |
| Voltage Settling |
≤1S |
| Voltage Volatility |
≤±0.5% |
| Frequency Steady State Regulation Rate |
≤0.5% |
| Frequency Transient State Regulation Rate |
≤±10% |
| Heat Consumption |
9.8mj/kw.h |
| Pressure |
5-20kpa |
| Intake Mode |
Natural intake |
| Sparking Mode |
Sparking plug |
| Voltage Regulation Mode |
automatic |
| Speed Regulation Mode |
Electronic speed regulation |
| Lubricating Mode |
Pressure and splash |
| Cooling Mode |
Closed/open circulating water cooling |
| Starting Mode |
24V electric motor |
| Overhaul Time |
≥20000h |
| Noise |
≤105aB(A) |
| Exhaust Temperature |
≤650°C |
Machine supply details:
Ignition system:We adopt ignition system of magneto which produced by American ALTRONIC company,including:magneto,high-tension coil,sparking plug.
Starting system: DC24V electric motor,12v190 adopt ST710 of direct-current.
Pressure charging system:Pulse Mixed-flow supercharger, compression ration is 1:8,meet engine's requirement for gas-flow rate.
Speed regulating system: EGS gas controller of American WOODWARD Company.
Full automatic system for optional: ATS for automatic switch form national grid power to generated power, double direction.
Low voltage cables between generator set and control room: available if needed.
Service committee :
1. Pre-sale service:
1) We will send our engineer to prospect the site of power station free of charge.
2) According to the situation of site, we will provide design drawings, such as power plant floor drawing, cooling system drawing, genset foundation, control room design, etc.
2. Sale service:
1) Operator training would be conducted by Lvhuan technicians during the process of commissioning or Factory training course in China,
2) Installation and commission of the genset would be instructed assisted by Lvhuan technicians at site.
3. After-sale service:
1) We have strong after-sale team, we will response within 24 hours and provide technical supports by phone or site guiding, help our clients to gain the biggeset profit.
2) For the quality problem, we will service for you free of charge during the guarantee period.
3) We provide one year guarantee period and lifetime service.
FAQ :
1. How to choose the right model ?
A : It depends on continuous output power, Voltage, Frequency and fuel type.
Please tell me what fuel (natural gas, biogas, biomass gas,wood syngas, methane,coal gas) or raw material (like wood, grass, nutshell etc) The right model of generator will be recommend soon .
B : Our sales and engineers are always available at your service.
2. What is the oil consumption and capacity per hour ?
A : 1.0-1.63g of lubricant oil consumption per hour.
1.0 Cubic meter gas can produce 1.5 - 3.0 kw/h power. The capacity depends on gas energy(Kcal). E.g 1.0 Cubic meter natural gas produce about 3.0-4.0kw/h
3. What is the overhaul ?
A : About 30000 working hours.
One week is enough to finish. We offer manual for weekly, monthly and overhaul maintenance.
4. What is the warranty ?
A : One year.
we offer all spare parts free of charge during warranty period. After this period, spare parts are not free. What's more, a set of spare parts will be shipped together with generator set free of charge.
5. How is the after sale service and maintenance?
A:We offer installation,repair and maintain service abroad. And online guide service if needed anytime. Our before-sale, in-sale and after-sale service are all trustable, you can name it.
6. What products we offer ?
Biomass gasifier,Biomass/syngas generator,biogas generator,Natural gas(CNG,LNG) / methane generator,Coal gas generator,Diesel generator.
Product picture
Audited Supplier 
){kind=link}