250kw Biomass Gasification Power Plant/Syngas Power Generator Set

• Customization: Available
• After-sales Service: One Year
• Warranty: 12 Months
• Model NO.: LHBMG250
• Power: 250kw/200kw
• Certification: ISO, CE
• Output Type: AC Three Phase
• Standard: Standard
• Prime Power/Standby Power: 200kw/250kw
• Rated Speed: 1500/1800rpm
• Rated Frequency: 50/60Hz
• Rated Voltage: 400V/230V
• Phase: AC 3-Phase, 4 Wire
• Engine Capacity: 26.9L
• Cylinder Number: 12
• Cylinder Bore: 138mm
• Stroke: 150mm
• Transport Package: Export Seaworthy Packing.
• Specification: CE&ISO
• Trademark: LVHUAN POWER
• Origin: Shandong, Jinan
• HS Code: 8502200090
• Production Capacity: 2000 Sets.

Product Description

We have a sales staff can speak in Russian, If you from  Russia, Kazakhstan, Ukraine, Belarus, Uzbekistan, and other countries.  

1. Gas Requirements of Biomass Gas Genset:
 Within 1m from pressure regulating valve of gas intake
Gas temperature ≤ 40ºC
Pressure 3-20kpa, pressure changing rate ≤ 1kpa/min
H2S ≤ 200mg/Nm3
NH3 ≤ 20mg/Nm3
Tar Contecnt ≤ 20 mg/Nm3
Heat value ≥ 4.2MJ/Nm3
Impurity particle size ≤ 5μm, impurity content ≤ 30mg/Nm3
Moisture content ≤ 40g/Nm3
 

Product Parameters

 

Model	LHBMG250
Standard	JB/T9583.1-99
Engine model	LH12V138
Alternator model	Brushless /IP23/3PH 4Wire)
Machine power	200KW/250KVA
Rate voltage	400V / 220V (adjustable)
Rate frequency	50/60Hz
Rate power factor	0.8
Rate speed	1000r/min
Speed regulation mode	Automatic
Voltage regulation mode	Automatic
Operation model	Auto/Manual
Cooling mode	Open/close water cooling
Start mode	24V DC electric motor

3. Parameter of 250kw Biomass gas engine:
 

Engine mode	LH12V138	Sparking mode	Sparking pl
Gas mixing type	IMPCO	Heat Consumption	≤10MJ/kW.h
Cylinder number&type	12Vee60°	EGT	≤650ºC
Cylinder diameter	138mm	Stroke	150mm
Displacement	26.9L	Lubrication	Pressure and splash
Rate speed	1000r/min	Cooling model	Open/closed water cooling
Emissions targets	EU III	Noise	≤105dB

Our Advantages

Advanced electronic speed governor with super performance.
Advanced ignition sensors and high-energy ignition system.
Advanced gas pressure regulation system.
Less specialized parts, high generalization, easy maintenance, low maintenance cost.
Economical, low operating cost.
Reduced the carbon deposition on the wear of the engine cylinder and the valve to prolong the using life of the genset.
Adopt one of the world's most advanced gas control technology, fully available to the characteristics of fuel gas.

 

Company Profile

Since 2008
Factory area over 40000m2.
Starff over 260 employees.
Technicians over 100 people.