green energy biomass generator
Worksite requirements for green energy biomass generator
The worksite needs to meet following basic requirements:
A) Ambient temperature between -40º C~45º C;
B) Relative humidity less than 90%(35º C);
C) Site elevation not higher than 2000m;
D) For outdoor installation, simple rain shelter is required.
green energy biomass generator factory:
The genset will be able to output at its full power with fuel gas with the specification as below:
1m distance away from genset's pressure regulating valve of inlet
Temperature of natural gas ≤ 40º C;
Pressure of natural gas 3~10kPa, velocity of pressure≤ 1kPa/min;
H2S≤ 200mg/Nm3;
NH3≤ 20mg/Nm3
Tar Content ≤ 20%mg/Nm3
Impurities particle size≤ 5μ M; Impurity content≤ 30mg/Nm3;
Moisture Content of biomass ≤ 40g/Nm3; Heat value more than 4.2MJ/Nm3
If fuel gas contains higher quantity of sulfur and ammonia, it not only corrodes the pole of spark plug seriously, but also increases the acid value, which corrodes internal parts of genset and corrodes the genset with precipitates.
Why you chioce Shandong Lvhuan Power equipment Co., Ltd. green energy biomass generator?
1. over 15 years gas/diesel generator produced experience;
2. main products include: diesel engines, biomass generator, natural gas generator , biogas generator , coal gas generator set, etc. Products arrange from 5kw-3000kw ;
3. Our workshop covering more than 40000 square meters, techincal engineer and after-service more than 100 person.
4.CE,ISO9001:2008,ISO2001:1400 ,SGSetc.certificats approve and passed many patents.
5. exported many countries such as: Spain, Italy, Canada, Venezuela, Austraila, Thailand, Malaysia,Philippine,Indonesia,and with some Africa countries etc.
6.we provide TURN-KEY project : like water removal system,H2S removal system,gasified equipment,
recovery system of exhaust heat,CCHP system etc.
7.machine have long serive-life: more than 15 years
green energy biomass generator Service:
1.pre-sale service:
(1)We will send our engineer to prospect the site of power station free to charge.
(2)According to the situation of site we can supply you many drawings.
2.Sale service:
(1)we will send our engineer to the site to guide you the installation of generator set, subsystem and relative equipment.
(2)We will debug the generator set till it can generate power successfully.
(3)We will also supply a technical training to the operators.Or send your staff to our company train you till you can operate the generator set.
3.After-sale service:
(1)our engineers are in charge of different area,we will response periodically and support you technical service free of charge.
(2)For the quality problem, we will service for you free of charge during the guarantee period.
(3)One year guarantee period and lifetime service.
(4)we solve quality problem in time when genset doesn't work,We insure to help our clients to gain the biggest economic profit.
4.Spare parts service:
(1)Please provide parts No.s We can supply to you all engine/generator spare parts as your demand,
(2)All parts were from original factories or professional factories,complete in specification,keep good quality.
FAQ
1. Delivery time?
according to load power ,normal is 30-120days.
2. Do you have CE?
Yes, our generator approve CE,ISO9001,ISO14001,SGS etc.
3. What the Engine brand it is?
Engine brand :Lvhuan.
we are professional manufacturer for gas engine over 20 years.Our gas engine have achieve 15 patents.
4. What is the intake gas system ?
USA WOODWARD or German HEINZMANN.
5. What's your generator advantage?
1)Alternator using STANFORD or SIEMENS
2)EGIS Liner
3)Altronic Spark plug
4)ProAct actuators
5)Tecjet control valve and mixer
6)Operation cost is very low about USD167can generating 1kw.h and low maintenance cost
green energy biomass generator main parameter
Model Number (Engine Type) |
LHBMG20-600 |
| Brand Name |
LVHUAN |
| power |
20kw-600kw |
| Rated Speed |
1500/1800RPM |
| Rated Frequency |
50/60Hz |
| Rated Voltage |
400V/230V |
| Phase |
AC 3-Phase, 4 wire |
| Voltage Stability |
≤±2% |
| Voltage transient |
≤±10% |
| Voltage Stable time |
≤1 |
| Heat consumption |
≤9.8mj/kw.h |
| Lubricant consumption |
≤1.63g/kw.h |
| Engine Capacity |
4.33 L |
| Cylinder Number |
4 |
| Cylinder Bore |
105mm |
| Stroke |
125mm |
| Starting System |
DC 24V electic motor |
| Cooling method |
water cooler |
| Lubricant method |
Passive and flying lubricant |
| Isolation class |
H |
| Protection |
IP23 |
| Alternator |
ENGGA |
| Power Factor |
0.8 lagging |
| Exciting method |
brushless |
| Colour |
your choice |
| Certificates |
ISO 9001:2008, CE |
| Warranty |
1 year or 1500 running hours |
| Type |
Open |
| Control system |
Automatic alarm system |
| Size |
2100x900x1200mm |
| Weight |
950kg |
Audited Supplier 
){kind=link}