100kw-5MW Wood Chips Biomass Gasification Power Plant Biomass Generator

• Customization: Available
• After-sales Service: One Year
• Warranty: One Year
• Model NO.: LHBMG400
• Power: >200kw
• Certification: CCC, ISO, TLC, CE
• Output Type: AC Three Phase
• Standard: Standard
• Model: Biomass Gas Generator
• Name: Biomass Gas Generator
• Rate Power: 400kw
• Voltage: 380V/220V
• Staff: Over 250 People
• Technology Engineer: Over 100 People
• Factory Area: Over 40000m2
• Feature Product: Gas Generator and Diesel Generator
• Main Products: 12V190 Series Engine for Gas and Diesel
• Serivce Abroad: Yes
• Transport Package: Non-Fumigation Plywood Case or Container
• Specification: CE, ISO14001, CEC
• Trademark: Lvhuan Power
• Origin: China, Jinan
• HS Code: 8502200090
• Production Capacity: 30 Sets Per Month

Product Description

Shandong Lvhuan Power Equipment Co, . Ltd. 

WE DEVOTE OURSELVES TO GAS POWER GENERATION. 

1. Company Introduction

Since 2008Factory area over 40000m2Starff over 260 employeesTechnicians over 100 peoplewebsite lvhuanpower.en.made-in-china.com 

2. Scope of Application 
    Waste to electricity, such as the wood chips, saw dusts, rice husk, straw, nut shell and so on, gasified by biomass gasifier to get the biomass gas and realize electricity generation. 
3. Advantage 

Advanced configuration keep accurate ans stable working condition under high speed working speedHigh generalization, easy maintenance, low maintenance cost.Economical, low operating costReduced the carbon deposition on the wear of the engine cylinder and the valve to prolong the using life of the genset.Adopt one of the world's most advanced gas control technology, fully available to the characteristics of fuel gas.Powerful low pressure gas SPI(single point Injection) system used for various supercharger premixed engine.Suitable for differnt concentration methane and propane, variety of quality gas.Precise air-fuel ratio rarefied combustion control and Generator speed/load controlRealize lean burn, reduce the intake pipe tempering and improved efficient to reduce the heat load.

4. Gas Requirements of Biomass Gas Genset
Within 1m from pressure regulating valve of gas intake

LHV ≥ 4.2MJ/Nm3Pressure of natural gas: 5-20kpa, rate of pressure change ≤ 1kpa/minH2S ≤ 200mg/Nm3Tar content ≤ 20mg/Nm3Nm3 ≤ 20mg/Nm3Impurity particle size ≤ 5μm, impurity content ≤ 30mg/Nm3Moisture content ≤ 40g/Nm3 

5. Service 

1.Pre-sale service:
A.Our engineers are available for onsite prospect before installation free to charge. 
B. Foundation drawing and detailed Dimension free form us.
 
2.In-sale service:
A. Onsite overall guide installation,operation and maintenance training . 
B. Assistance and instruction of trial running. 
 
3.After-sale service: 
A. 24 hours online or in person after sale service. 
B.12 months warranty. We take care of all errors/breakdowns in this period. 
 
4.Spare parts service: 
A.All spares parts on our gensets supplied by us. 
B. Free spare parts together with genset when shipping. 

Biomass generator list
Gen-set mode	Prime power	Continuous power		Engine Mode	Displacement
LHBMG10	10kw	8kw		LH2100	1.80L
LHBMG20	20kw	16kw		LH4100	3.61L
LHBMG30	30kw	24kw		LH4105	4.32L
LHBMG40	40kw	32kw		LH6105	6.45L
LHBMG50	50kw	40kw		LH4135	8.58L
LHBMG60	60kw	48kw		LH4135	8.58L
LHBMG70	70kw	56kw		LH6135	12.8L
LHBMG80	80kw	64kw		LH6135	12.8L
LHBMG90	90kw	72kw		LH6135	12.8L
LHBMG100	100kw	80kw		LH6135	12.8L
LHBMG120	120kw	100kw		LH12V135	25.75L
LHBMG150	150kw	120kw		LH12V135	25.75L
LHBMG180	180kw	144kw		LH12V135	25.75L
LHBMG200	200kw	160kw		LH12V135	25.75L
LHBMG300	300kw	240kw		LH6190	35.70L
LHBMG400	400kw	320kw		LH12V190	71.45L
LHBMG500	500kw	400kw		LH12V190	71.45L
Parameter of biomass generator
Rate Voltage			400V/230V
Phase			3Phase  4 wires
Rate Frequency			50HZ/60HZ
Power Factor			0.8
Voltage Regulating Range			95%-105%
Voltage Steady State			≤±2%
Voltage Transient State			≤±10%
Voltage Settling			≤1S
Voltage Volatility			≤±0.5%
Frequency Steady State Regulation Rate			≤0.5%
Frequency Transient State  Regulation Rate			≤±10%
Heat Consumption			10mj/kw.h
Pressure			5-20kpa
Intake Mode			Natural intake
Sparking Mode			Sparking plug
Voltage Regulation Mode			automatic
Speed Regulation Mode			Electronic speed regulation
Lubricating Mode			Pressure and splash
Cooling Mode			Closed/open circulating water cooling
Starting Mode			24V electric motor
Overhaul Time			≥30000h
Noise			≤105aB(A)
Exhaust Temperature			≤650°C

12. FAQ
1)How to choose the right model?
Firstly, depending on the loading equipment or the total power you need.
Secondly, depending on the hours the genset working per day.
Thirdly, depending on the LHV of the fuel gas. 

2) What kind of gas could generate electricity?
 We use the internal combustion engine. And the suitable gas are natural gas, biogas, syngas and LPG.
 If the fuel gas is not the natural gas, please contact us and we will recommend you the suitable model based on the LHV of the fuel gas. And we will provide our professional suggestions.
 
3) What will be the electricity used for?
 Please kindly tell us the electricity will be used for the loading equipment or for the grid. We will recommend the suitable model for the loading equipment and the suitable configuration for the grid.
 
4) Voltage and frequency required.
Necessary information could be supplied. Our standard configuration is 220/380V and 50/60HZ. Please contact us for other voltage and frequency. We will make the suitable proposal.
 
5) What is the consumption of the genset? 
This will be based on the LHV of the fuel gas. Please contact us and we will provide you the exact data. 

6) Warranty 
 1Year not including the quick-wear parts. But we could provide you some free parts with the genset.