Main technical advantages:
1) Valve seat materials are imported special steel, valve use wear-resistant materials and the latest technology.
2) Piston and cylinder head production using new materials, high-performance low-emission hybrid rapid combustion cylinder. Combustion control technology to protect machine film.
3) Change the duration of the ignition control, long-life spark plugs.
4) Intergrated control diagnostics, intergrated approach to control the explosion-proof technology.
Worksite requirements:
Worksite needs to meet following basic requirements:
Ambient temperature between -40 to 40°C
Relative humidity less than 95% (35°C)
Site elevation not higher than 2500m
For outdoor installation, simple rain shelter is required
Fuel gas requirement:
Genset will be able to output at its full power with fuel Natural Gas with the specification as below:
Natural Gas must be purified before burning in engine
Suitable Natural Gas conditions for genset
1m distance away from genset's pressure regulating valve of inlet
Temperature of biogas: ≤40°C
Pressure of Natural Gas 5-20kPa, velocity of pressure ≤1kPa/minute
CH4 content of Natural Gas: ≥40%, variation rate: ≤2%/minute
H2S: ≤200mg/Nm3
NH3: ≤20mg/Nm3
Impurities particle size: ≤5μm, impurity content: ≤30mg/Nm3
Moisture content of Natural Gas: ≤40g/Nm3
Note: excessive sulfur contents can do serious damage to engine elements
Purification of Natural Gas has a significant impact on machine life and continuous running time
Packing and shipping:
Genset would be covered with plywood case or plastic film cover
Control panel, batteries, electric cables are packed with plywood boxes or cartons
Exhaust pipes, engine mufflers are put in the container without packing
Audited Supplier 
){kind=link}