300kw - 2MW Combine Heat and Power CHP Wood Gas / Pyrolysis Gas Generator Set

• Customization: Available
• After-sales Service: One Year
• Warranty: 12 Months
• Model NO.: LHBMG500
• Output Type: AC Three Phase
• Gas Source: Biomass Gas
• Certification: CE, ISO
• Power: 300kw - 2MW
• Standard: Standard
• Name: Combine Heat and Power CHP Wood Gas / Pyrolysis Ga
• Fuel: Biomass Gas, Syngas, Wood Gas, Pyrolysis Gas
• Alternator: Siemens: Brushless, Self-Excited, with AVR, Insula
• Controller: Comap, Deepsea
• Ignition System: Altronic
• Lube Oil: Total Gas Engine Oil 15W-40
• Intake Mode: Natural Aspired
• Cooling Mode: Closed or Open Type Water Cooling
• Lubrication Mode: Pressure and Splash
• Color: Yellow or Custom Colors
• Speed: 500/600rpm
• Transport Package: Membrane or Plywood
• Specification: 300kw - 2mw
• Trademark: LVHUAN
• Origin: Jinan, Shandong
• HS Code: 8502200090
• Production Capacity: 50 Sets Per Month

Product Description

Combine Heat and Power chp Wood Gas / Pyrolysis Gas generator 300kw - 2mw

1. Combine Heat and Power chp Wood Gas / Pyrolysis Gas generator 300kw - 2mws
1) Low cost in maintenance
2) Large cylinder , Long Stroke, Low Speed, which means big reserve power capacity and constant power output
3) Low Engine Speed at 500 or 600RPM
4) Naturally Aspirated, which means low failure rate and minimaldowntime
5) Internal MixingSystem (for high hydrogengas)
6) Strong Treatment and Resistance AbilityAgainst TAR
7) Long Overhaul Time of 60000hours and lifecycle of 20-25 years
8) CE and ISO approved
 
2. Main technical parameters for Combine Heat and Power chp Wood Gas / Pyrolysis Gas generator 300kw - 2mw:

Syngas Engine	Item	Technical specifications
	Model	6300D/M	8300D/M-1	8300D/M-2
	Type	In-line, four-stroke, inter-cooling, spark plug ignition, open combustion
	Cylinder number	6	8	8
	Cylinder diameter (mm)	300
	Rated speed (r/min)	500	500	600
	Rated power (KW)	400	500	550
	Heat consumption at rated power (MJ/kwh)	≤11.0
	Rotating direction (from flywheel side)	Clockwise
	Starting mode	Compressed air/motor start
	Exhaust temperature (ºC)	≤600
	Gas pressure (kPa)	≥2.5
	Gas inlet temperature (ºC)	≤40
	Oil consumption rate (g/kW.h)	≤0.8
Syngas Generator set	Model	350GFM	400GFM	500GFM
	Rated power (kw)	350	400	500
	Voltage (V)	400/6300/10500
	Current (A)	631/40/24	722/46/28	902/57/34
	Power factor (COSΦ)	(lagging)
	Excitation mode	Brushless
	Phase and connection	3 phase 4 wires/3 phase 6 wires
	Size (L*W*H) (mm)	5800*1600*2900	6400*1600*2900	6400*1600*2900
	Weight (kg)	18000	22000	22000

3. Environment requirements for Combine Heat and Power chp Wood Gas / Pyrolysis Gas generator 300kw - 2mw:
1) Ambient temperature between -20°C~+40°C;
2) Relative humidity less than 90%(20ºC);
3) Site elevation not higher than 2500m;
4) For outdoor installation, simple rain shelter is required. 

4. Combine Heat and Power chp Wood Gas / Pyrolysis Gas generator 300kw - 2mw gas quality requirements
1) Gas temperature≤40°C
2) Gas pressure 2.5~10kpa, Pressure change rate≤1kPa/min
3) Tar content≤20mg/Nm3
4) H2S content≤50mg/Nm3
5) Impurities particle size≤5μm, Impurity content≤30mg/Nm3
6) Moisture content≤20 mg/Nm3
7) Heat value≥4MJ/Nm3.

FAQ

1. How to choose the right model?
To choose a right model, we need to know required continuous output power, local voltage and frequency and fuel (such as diesel, natural gas, biogas, biomass gas, coal gas, syngas, etc.). For biomass power plant and coal gas power plant, some clients may doesn't have gasification system, then we need information about raw material.
2. What's the warranty?
The warranty is one year. We will offer free service and spare parts during warranty period. Lifetime service will be provided by our trustworthy after-sale team.
3. How to do the maintenance?
Operator training will be provided by our technician. After training, local operator can do the basic maintenance by themselves according to our maintenance manual.
4. Will be operation training offered?
Yes, operator training would be conducted by our technicians during the process of commissioning or factory training course in China.
5. What's about the installation and commissioning of syngas/biomass/pyrolysis/wood gas generator?
Installation and commissioning of the genset would be instructed assisted by our technicians on site.

Welcome to ask for question and quoation!