Professional Manufacturer for Coal Gas Generator
|FOB Price:||US $8,700-149,000 / Piece|
|Min. Order:||1 Piece|
|Min. Order||FOB Price|
|1 Piece||US $8,700-149,000/ Piece|
|Payment Terms:||L/C, T/T|
- Output Type: AC Three Phase
- Certification: CE, ISO
- Standard: Standard
- Warranty: 1 Year
- Trademark: LVHUAN
- Specification: check with us
- HS Code: 8502200000
- Gas Source: Natural Gas
- Power: ＞200kW
- Starting Mode: 24V Electric Motor
- Ignition Mode: Plug Ignition
- Transport Package: Plastic Film Cover or Plywood Box
- Origin: China
|Gas Mixing Type||Outside|
|Phase||3 phase , 4 wire|
|Voltage regulating range||95-105%|
|Voltage Steady State||≤ ± 2%|
|Voltage Transient State||≤ ± 10%|
|Voltage setling time||≤ 1S|
|Voltage volatility||≤ ± 0.5%|
|Frequency Steady State Regulation rate||≤ 0.5%|
|Frequency Transient State Regulation rate||≤ ± 10%|
|Heat consumption||≤ 11.38mj/kw.h|
|Intake Mode||naturally aspirated|
|Ignition mode||plug ignition|
|Pressure regulation mode||Automatic|
|Speed regulation mode||electronic speed regulate|
|Lubricating mode||pressure and splash|
|Cooling mode||closed/open cooling|
|Starting mode||24V electronic motor|
|Overhaul time||≥ 30000h|
|Noise||≤ 105dB ( A )|
|Exhaust Temperature||≤ 650ºC|
The coal gas must be purified before burning in engine:
1. Gas temperature≤ Local temperature + 15º C(≤ 40º C is better)
2. Gas Pressure can be adjusted from 5-20 kPa, the changing pressure rate ≤ 1kPa/min.
3. Use low-sulfur coal, one set sulfur scrubber is necessary (H2S≤ 200mg/Nm3)
4. NH3≤ 20mg/Nm3
5. Tar and Particulate matter≤ 50mg/Nm3.
6. Diameter of Particulate matter≤ 5μ M, particulate content≤ 30mg/Nm3.
7. Moisture content≤ 40g/Nm3
10. Heat Value of coal gas: ≥ 4.2Mj/ Nm3.
1. Pre-sale service:
1) We will send our engineer to prospect the site of power station free of charge.
2) According to the situation of site, we will provide design drawings, such as power plant floor drawing, cooling system drawing, genset foundation, control room design, etc.
2. Sale service:
1) Operator training would be conducted by Lvhuan technicians during the process of commissioning or Factory training course in China,
2) Installation and commission of the genset would be instructed assisted by Lvhuan technicians at site.
3. After-sale service:
1) We have strong after-sale team, we will response within 24 hours and provide technical supports by phone or site guiding, help our clients to gain the biggeset profit.
2) For the quality problem, we will service for you free of charge during the guarantee period.
3) We provide one year guarantee period and lifetime service.
Welcome to consult if anything unclear !